Beginner Basics • Re: Multi IP PPPOE Wan routing
Maybe it is logical for you (because you know how the whole stuff is physically located and how it is connected) but I cannot understand the drawing.What do you mean by PPPoE clients? What are those?...
View ArticleWireless Networking • Re: cAP ax 5GHz not working in CAPsMAN
skip-dfs-channels=allsolved it for me not sure if its the same problem you had, but had no 5GHZ SSID on capsman broadcasting till i set it/interface wifi channel add band=5ghz-ax disabled=no...
View ArticleGeneral • Fibre ISP - VLAN PPPoe configuration
Hello,I'm new here and wasn't sure in which section to post this so lemme know if this is the wrong section. My ISP just upgraded me to fiber so they replaced my old modem with a wifi router (Nokia...
View ArticleGeneral • Re: CCR2004-1G-2XS-PCIe causes INSTANT host crash when it's rebooted
Yeah, it is clear that this card, which seemed very attractive for co-located servers requiring a router, is not usable in practice.E.g. it would also have to be running when the system is in STANDBY...
View ArticleRouterBOARD hardware • Re: Running out of space on 16MB RouterBOARDs
The issue probably is that .npk packages are mostly a read-only compressed filesystem that is copied to the flash in its entirety and then are mounted at runtime (with the appropriate code to...
View ArticleGeneral • Re: Network resets a lot and looped packet message after upgraded...
I'm running several routers with RSTP, but for me the current "stable version" is 7.12.1So I am not running 7.14 on any production device.... only in test environments where there is no bridge.So...
View ArticleForwarding Protocols • Re: Split subnet to smaller in a router with BGP
I assume you are trying to advertise smaller subnet than /24 to the upstream. Typically upstream does not accept smaller subnets than 24Statistics: Posted by mrz — Mon Mar 18, 2024 11:11 am
View ArticleGeneral • NATing output traffic via Loopback over IPSec
I have a setup that requires multiple Mikrotiks to IPSec to a Fortigate. The IPSec section works and has been running stable for years. We recently have received a new requirement to have RADIUS auth...
View ArticleRouterBOARD hardware • Re: Upgrade from RB750Gr3
There is a major problem: it has only 15.3 MB flash (several other devices have 16 MB but this has less) and this is becoming a problem with recent RouterOS versions.You can install 7.12.1 and keep...
View ArticleUseful user articles • Re: 📌 Tool: Using Splunk to analyse MikroTik...
2024-03-18_17-26-08.pngStatistics: Posted by fengyuclub — Mon Mar 18, 2024 11:32 am
View ArticleBeginner Basics • Re: CCR1036 Was a proplem with version 7
The CCR1036 hardware is cheesy, my LED display breaks and fall, i need to glue it back, and each time PSU failed i need to pay USD 64 (NTD 2,000) for fix. This time is the fourth failure of My CCR1036...
View ArticleRouterBOARD hardware • Re: CCR1036 Power Supply
What about those users mistakenly buying the CCR1036 R1 ? i experienced 4 times of PSU failure since 2018, average 1.5 years a blow.I very much doubt whether there are still r1's in stock anywhere. I...
View ArticleRouterBOARD hardware • Re: hAP ac2 not working after 7.14 update.
Yesterday I setted up the device as a station while working on 7.13, got the Internet access and updated device to the 7.14.So, now, after the upgrade (to 7.14) I have hAP ac RB962UiGS-5HacT2HnT...
View ArticleGeneral • ROS 7.14.1 in CCR2216-1G-12XS-2XQ // Kernel Failure
Hi everyone, we have a CCR2216-1G-12XS-2XQ updated with ROS 7.14.1 which randomly restarts every 2/3 days. After the restart we notice the KERNEL FAILURE error in the LOGs. Does this happen to anyone...
View ArticleGeneral • Re: SSTP Mikrotik Client / probably bug 6.41.3
It happens that I have the same issue with some old installations that I cannot risk upgrading due to the fact that they are remote installations.My SSTP Server runs on 7.14.1, while those remote...
View ArticleClik here to view.
Beginner Basics • Re: CRS354 - vlans work only with specific networks
Thanks for clarification. I was experimenting with setting other vlans as I had some strange behaviour with one of the switches being unreachable through management net as long as it had another vlan...
View ArticleGeneral • Re: Very bad reliability Mikrotik Products and ROS
Also for your company is a good idea to test the new releases because you fix one issue and broke a 4 things that working good.I totally agree with you, and it's become a tread mark form...
View ArticleGeneral • Re: Fibre ISP - VLAN PPPoe configuration
Probably something like, assuming connected on ether1/interface vlanadd name=vlan40 interface=ether1 vlan-id=40/interface pppoe-clientadd add-default-route=yes interface=vlan40 keepalive-timeout=10 \...
View ArticleBeginner Basics • Re: Req for Help with Wireguard Config
Allowed IPs on the router is wrong.......................You need a separate peer line for each peer, on the router you dont need client endpoint............/interface wireguard peersadd...
View ArticleClik here to view.
General • Possible memory leak in Winbox 7.14?
Just had an alert from a managed server that memory was getting low. Winbox is using an awful lot of RAM even though it's only got 5 windows open. It has been left running for over a week.Open...
View Article