Looking again at my post, i can agree that my diagram does not make any sense... sorry for that!Maybe it is logical for you (because you know how the whole stuff is physically located and how it is connected) but I cannot understand the drawing.
What do you mean by PPPoE clients? What are those? two ISP modems? You say you have two separate ones of those, yet they seem both connected to ether1? So what it is, a media converter from fibre with only one ether port out?
Then you you have two vlans that in your drawing are represented as if they were two separate lans, yet they are both connected to ether5?
Also, are you still on 6.48.4?
What is your current configuration? (anav found a few mistakes at the time, did you implement his suggestions or something else?).
Yes i applied the suggestions that i got in the posts above but it did not work back then, also made the update to 7.x a while back.
It is clear to me that i have a skill issue with networking and the way i want to setup everything is a bit more complex then what i am able to implement. But after a bit of back-and-forth with my ISP, they suggested to use a switch between the ONT (the fiber box that they gave me) and my PPPoE clients. Previously i connected the ONT directly to the eth1(WAN) port on the hEX router.
The setup now is like this:
I hope it makes more sense then the other diagram...
Thanks for the reply!
Statistics: Posted by dacian — Mon Mar 18, 2024 10:47 am