General • Re: VxLAN duplicate MACs in FDB
Code: /interface bridge vlanadd bridge=bridge tagged=bridge,sfp1,vxlan1,ether2 vlan-ids=1401add bridge=bridge tagged=bridge,sfp1,vxlan1,ether2 vlan-ids=1404add bridge=bridge...
View ArticleForwarding Protocols • default route distance filter
I'm using a simple routing filter to change the default route distance to 3 but this seems to capture all routes received as everything fits in 0.0.0.0/0 how would I exactly match this instead of...
View ArticleClik here to view.
General • Re: DHCP Relay in VRF
I have discovered the same thing recently.My conclusion is that since the vrf's in v7 are totally separated and the response from the DHCP-server (DHCPOFFER) will have a dst-address of an IP-address...
View ArticleWireless Networking • CAPax 2 SSIDS on 2 VLANs + 1MGT VLAN > I'm getting...
Hi! Just replaced my old AP by a CAPax and it ran for a few months flawlessly, until I tried an update to 7.13. The wifi had issues with some devices (mainly some cheap Windows laptops with some RTL...
View ArticleRouterBOARD hardware • Replacement for HeX s (last minute panic)
Hi all, I've recently upgraded the ISP to 1gb+ and the HeX s that has served me well for years is tapping out at about 800Mb/s.So I'm about to pull the trigger on a RB5009UG+S+IN and cAP ax lunch...
View ArticleSwOS • Re: CRS326-24G-2S+ SFP questions/problems
any ideeas?Statistics: Posted by panicos — Thu Dec 28, 2023 4:53 pm
View ArticleClik here to view.
Scripting • Re: Inconsistent results with JSON serialize, deserialize and...
There are no floats in RouterOS script, so that there "lost in translation" is to be expected IMO — there is no way to store the floating point number. So it becomes a string, and thus a string if...
View ArticleGeneral • Re: Individual firewall and Node-RED port problem
Code: /ip firewall address-listadd address=192.168.68.49 comment=Solid-Aurora list=adminadd address=192.168.68.50 comment=Rapid-Monster list=admin/ip firewall connection trackingset udp-timeout=10s/ip...
View ArticleForwarding Protocols • Re: default route distance filter
dst == 0.0.0.0/0Statistics: Posted by mrz — Thu Dec 28, 2023 5:02 pm
View ArticleGeneral • Re: ltAP modem R11e-LTE6 upgrade firmware to V034 failed ?
was anyone successful with the firmware update to V036 under ROS 6.x ?br, RichardStatistics: Posted by roe1974 — Thu Dec 28, 2023 5:11 pm
View ArticleRouterBOARD hardware • RBmAP2nD query
Does the RBmAP2nD support 802.3af/at? That is, can it be powered by 802.3af/at compliant PSE (Power Sourcing Equipment)?In this document on Microtik's website here...
View ArticleWireless Networking • Re: DFS on CAPsMAN
The problem with DFS is that at some installation locations even though a fixed channel is selected where for sure there is no active radar, DFS still detects it. Then the channel changes to a random...
View ArticleBeginner Basics • Re: hEX PoE lite default + vlan
Anyone?when appying the script i was unable to get any access to the device.Needed to reset the whole config.Shouldn't be this difficult to create the setup I need?All other vendors I used in the past...
View ArticleWireless Networking • Re: CAP XL AC cannot exceed 350mb speed at 5Ghz
Although the CAP XL AC broadcasts 2.4 and 5Ghz signals neither 2.4GHz LED nor 5GHz LED blinking. They are solid off in wifi-qcom-ac driverCan confirm, mine are not working as well.Statistics: Posted...
View ArticleRouterBOARD hardware • Re: Replacement for HeX s (last minute panic)
I'm running a similar setup (RB5009+CAPax). I love the RB5009, but don´t expect to run 2,5G Internet + 10G to your NAS. 4-5G throughput is more realistic with some useful firewall, QoS etc, Also if...
View ArticleBeginner Basics • Re: Wireguard Question
Leo was spot on. The only issue is my business computer set of apps.It works well on my iphone and on my personal MAC.The weird thing is that I don't have the same issue with openvpn which itself...
View ArticleRouterBOARD hardware • Re: RBmAP2nD query
Passive POE only.See also this thread (back in time but interesting to read):viewtopic.php?t=88451Statistics: Posted by holvoetn — Thu Dec 28, 2023 6:41 pm
View ArticleScripting • cookie based auth using fetch
I am trying to convert some python code to a Mikrotik script. The code captures the current antenna strength from an ubiquiti lightbeam. The python code uses a session to pass cookie based auth...
View ArticleRouterOS beta • Re: v7 inter VRF route leak doesn't work for local IPs
version is 7.14beta3 now and what am i missing here?mikrotikVRFv7import-export-via-RD.pnghow to import ip routing infos from one VRF into another VRF?something which was possible in v6...
View ArticleForwarding Protocols • Re: Status of ROS V7 for BGP, MPLS, VPLS
inter-VRF route leaking via RD with import/export on ROSv7 like it was useable in v6That never existed in v6 either. There was just a workaround where you could establish bgp session between vrfs on a...
View Article