Hi! Just replaced my old AP by a CAPax and it ran for a few months flawlessly, until I tried an update to 7.13. The wifi had issues with some devices (mainly some cheap Windows laptops with some RTL wifi chipsets) so I decided to roll back to 7.12.1, as this is a mission critical network beeing in the state of change freeze (used for sending Christmas wishes by my wife, and I dared to touch it shortly before Christmas) . The downgrade went very badly, I have managed to loose most of my config. Of course I have no backup of the config. The network looks like this (some MT switches omitted, but they are working well since years): I am managing the network from the "Management Station" (my PC), from VLAN1. My RB5009 connects to the internet and routes between VLANS (nothing changed here, it was working well).
On the CAPax there are the following VLANs.
VL9 for management with the management interface 10.1.9.21
VL3 for privileged access 10.1.3.x, SSID "kk"
VL6 for guest access 10.1.6.x, SSID "kk-guest"
VL5 also for guest access, currently unused
WIFI clients can connect, but have no network acces.
If I disable the 5GHz WIFI interfaces, then I can ping management interface on the CAPac 10.1.9.21 from my PC!
Now as soon as I enable the 5G Interfaces, pings are lost.
I can always access my CAPac via RoMON from the RB5009.
The Interfaces:Bridge Ports: Bridge VLANS: My Config: I have tried some things, like changing the MAC on the 5G interfaces, but it did not help.
I'm not sure: is it some VLAN basics problem, which I can´t see any more, because I have gone over the config many many times?
Is this a bug? Maybe I just don´t understand how wifiwave2 works?
I would very much appreciate some help!
Thanks and a happy new year to everyone!
Peter
On the CAPax there are the following VLANs.
VL9 for management with the management interface 10.1.9.21
VL3 for privileged access 10.1.3.x, SSID "kk"
VL6 for guest access 10.1.6.x, SSID "kk-guest"
VL5 also for guest access, currently unused
WIFI clients can connect, but have no network acces.
If I disable the 5GHz WIFI interfaces, then I can ping management interface on the CAPac 10.1.9.21 from my PC!
Now as soon as I enable the 5G Interfaces, pings are lost.
I can always access my CAPac via RoMON from the RB5009.
The Interfaces:Bridge Ports: Bridge VLANS: My Config: I have tried some things, like changing the MAC on the 5G interfaces, but it did not help.
I'm not sure: is it some VLAN basics problem, which I can´t see any more, because I have gone over the config many many times?
Is this a bug? Maybe I just don´t understand how wifiwave2 works?
I would very much appreciate some help!
Thanks and a happy new year to everyone!
Peter
Statistics: Posted by woland — Thu Dec 28, 2023 4:37 pm