General • firewall management best practice ... zones ... and interface...
dear friends and neighbors ... .for a (relative) long time now I am using ROS .. mostly for routing stuff ... wifi-ptp ... service-network-dialin ... testbeds ... third-party-wifi-monitoring ... ( and...
View ArticleClik here to view.
Beginner Basics • RDP connection and the same LAN subnet IP
Hi guys!Is there a way to connect to remote server with 192.168.0.XX IP from local PC with 192.168.0.XX IP over RDP? For most of my company staff RDP connection works fine but for some not due to same...
View ArticleGeneral • Re: RouterOS Virtual Private Networks, which one to choose?
2. Zerotier: Allows one to stitch together all your subnets as if they were on the same subnet, L2 connection. Great for multicasting etc but harder to separate out users from each other as its one...
View ArticleBeginner Basics • Re: RDP connection and the same LAN subnet IP
Hi guys!Is there a way to connect to remote server with 192.168.0.XX IP from local PC with 192.168.0.XX IP over RDP? For most of my company staff RDP connection works fine but for some not due to same...
View ArticleGeneral • Re: firewall management best practice ... zones ... and interface...
Keep good default rules. Add admin required traffic flow rules. DROP all else in both input and forward chains.Use interface lists for all subnets, use dst/src address for single subnets, use...
View ArticleGeneral • Re: hAP ax2 WireGuard Performance
It is better than most other vpns I have tried, so numbers in a sense or not that meaningful, your speed will take a hit regardless.Should get at least 200-300Mbps depending upon of course the ISPs at...
View ArticleForwarding Protocols • Re: v7.1.1 OspfNeighbor received wrong LS Ack
...Isn't it just great how you don't get a notification when your support requests are closed. Tried the newly released 7.13.4 but no change.Statistics: Posted by oeyre — Fri Feb 09, 2024 1:08 am
View ArticleClik here to view.
Beginner Basics • Re: Help with configuration of a port.
So I have tested it and it does not work. The pbx does not register to the SIP server.So I have some more information that maybe helpful:on another greek forum (adslgr.com) a user (astbox) managed to...
View ArticleClik here to view.
General • Re: Hex crashing with 7.5
Same happening to my case with a brand new device. The only difference is that it only crashed once and the device is no longer accessible. I was tempted to install 7 when seeing someone showing that...
View ArticleGeneral • Re: Bricked RB1100AHX4
Yes you can, I think you need to look at this site.https://help.mikrotik.com/docs/display/ROS/RouterBOOThttps://help.mikrotik.com/docs/display/ ... RouterBOOThttps://help.mikrotik.com/docs/display/...
View ArticleRouterBOARD hardware • CRS518-16XS-2XQ-RM Thermal advice / SFP28 power budget
Hello,I've looked at the S+RJ10 guidelines (which is 2.7W and for SFP+ switches), however I need some general information for SFP28 on the CRS518-16XS-2XQ-RMI'm assuming this switch was designed to...
View ArticleGeneral • RB5009UPr+S+IN poe-in-voltage stuck
I have a new RB5009UPr+S+IN that was going to be used to power multiple devices, and during setup we were powering it with POE in for a while and learned that it cannot do POE in and out at the same...
View ArticleGeneral • Access single server across VLANs
I am trying to allow access to a single server in LAN_VLAN to the KIDS_VLAN. I've read on the forum that it's simply a firewall rule addition, but I can't seem to get the firewall rule to work...
View ArticleGeneral • Re: Access single server across VLANs
These look a bit dubious** add bridge=BR0 tagged=BR0,ether8 untagged=ether7 vlan-ids=20,30,40Perhapsadd bridge=BR0 tagged=BR0,ether8 untagged=ether7 vlan-ids=20add bridge=BR0 tagged=BR0,ether8...
View ArticleRouterBOARD hardware • Re: CRS518-16XS-2XQ-RM Thermal advice / SFP28 power...
From HW spec pageMax power consumption95 WMax power consumption without attachments45 WSo you have total 50W available to you including USB power (5W) , so 45W.That is what PCB power delivery is...
View ArticleWireless Networking • any fix yet for Macbook Pro 2016-2017 not working with...
Hi, everyone--I kinda wish I had read the forum before buying the hAP ax3, but there was no way to know I'd get hit by this problem before actually getting hit by it.I'd read these threads and have...
View ArticleGeneral • Cannot Drag a firewall rule in Mikrtotik
Hey,i was able to drag any rule in NAT but now i cannot do this any help ! did i done something wrong i remember i started doing just after i filtered to find some rulesStatistics: Posted by...
View ArticleWireless Networking • Channel Width (wifi-qcom-ac)
Hi all,two weeks ago I upgraded my five mikrotik aps to v.7.13.x and switched to the new wifi-qcom-ac package.Apart from the need to reconfigure my vlan tagging everything went smooth.I'm pretty...
View ArticleBeginner Basics • DHCP server enabled and clients have new IPs but no...
Hello everyone,I have an ADSL modem with the subnet 192.168.1.1/24. I set up the repeater bridge mode in the Mikrotik and I created a new wireless network, called Repeater, and the ADSL's wireless...
View ArticleBeginner Basics • Enhancing Security with MikroTik Firewall Best Practices
Hello everyone, I'm looking to enhance the security of my MikroTik router using the firewall. I want to ensure that my network is protected from potential threats and unauthorized access. Could you...
View Article