Beginner Basics • DHCP server enabled and clients have new IPs but no internet access

Hello everyone,
I have an ADSL modem with the subnet 192.168.1.1/24. I set up the repeater bridge mode in the Mikrotik and I created a new wireless network, called Repeater, and the ADSL's wireless network is called Zyxel.
The very first time, the wireless network Repeater is only repeating the Zyxel and when I connect to Repeater, I have internet access and my private IP is something like 192.168.1.20, and I can visit all websites like google.

Now I create a DHCP server on my Mikrotik within the subnet 192.168.73.1/24. Now if I connect to Repeater, my private IP is 192.168.73.2 for example, and in the Mikrotik > IP > DHCP Server > Leases, I see I'm connected. I see in my ipconfig[i/] in my Windows CMD that my gateway is 192.168.73.1 and when I open the gateway, I see the Mikrotik admin page.
But the issue is I don't have any internet access in this case.

I see in IP > Firewall > Connections that my laptop is sending an ICMP request but I don't have any internet access.

This is how I created an activated the repeater mode in Mikrotik: I created a security profile to connect to my ADSL modem. I created a Wireless interface to connect to my Zyxel modem, then I created a virtual interface called Repeater so I can connect to my Mikrotik.

Are there anything I didn't do or did I do anything wrong in this case?

I hope I said the required data to see what's done up to now.

Mikrotik model: RB941-2nD
Firmware version: 6.48.6

Thanks in advance

Statistics: Posted by inna — Fri Feb 09, 2024 9:15 am

---