Forwarding Protocols • VRF-Lite with Mangle and dstNAT to reach multiple...
Dear members, I need help with a particular setup where one MT router CCR2004 needs to be connected with multiple switches where a local lan is present with a fix subnet. In specific there are many...
View ArticleBeginner Basics • Re: 2WAN as Failover and Setup Wireguard KEY as Client
I am Sharing my final setup before making it stable (i hope at least) the main issue was from the Lancom them DNS had issues. and at the setup as friend informed me i closed the DNS from the DHCP...
View ArticleGeneral • VRRP access network also from slave?
First time setting up VRRP on a LAN network and have a question. Here is my basic setup:Mikrotik 1WAN 1.1.1.1LAN_interface: 192.168.1.2/24VRRP_interface: 192.168.1.1/24Mikrotik 2WAN...
View ArticleGeneral • Re: Enable to log into brand new switch
I've tried to log in without password but it didn't work so I guess the switch wasn't properly resetso I tried replacing what I thought was a zero with an O and boom i'm in !thanks for your suggestion...
View ArticleForwarding Protocols • No neighbors with OSPF
Hello everyone,This might sounds like a really basic problem but I'm struggling on this for two days.I'm trying to build a simple OSPF configuration with RB3011 on OS 7.12.1, I have 3 routers with...
View ArticleGeneral • Re: How to properly block youtube for certain client?
That “example” becomes obsolete in the presence of ECH.A better hope is to try and force all DNS to the router’s caching server, then selectively blackhole the unwanted domain names, but then you...
View ArticleGeneral • Re: How to do Inter-VLAN Bridging with MikroTik?
I'm kind of trying to achieve an embarrassingly simple thing here, if you think about it in terms of tags.Think of it as adding 3 more symbols to all MAC addresses on the network, with two main rules:...
View ArticleGeneral • Re: IPv6 trouble
Your ISP supports RFC4638, which means you can have the full size MTU=1500 for the pppoe-out1 interface. You can then keep MTU=1500 for your bridges and other vlans. First you should increase the MTU...
View ArticleWireless Networking • ARP response on behalf of wireless device, proxy-arp.
Good afternoon, I'm looking at ways to save device battery life on wifi.Another manufacturer advertises proxy-arp as one way to do this, the wifi access point will respond to the arp request on behalf...
View ArticleGeneral • Re: How to increate dcoms devices
This may help explain the issues you are running into.https://acroname.com/blog/how-many-usb- ... -i-connectStatistics: Posted by Kevdevon — Wed Apr 03, 2024 5:03 pm
View ArticleForwarding Protocols • Re: Hikvision DVR port forward 1 local and 1 main router.
Your diagram didn't make it here. One quick option is to enable uPnP on the router and NVR. That should open the need ports. Since uPnP will generate dynamic firewall NAT rules, you can use those as...
View ArticleGeneral • Re: VRRP access network also from slave?
Your VRRP addresses need to be /32. Preemption mode will cause a router to return to master once it's back online (still based on priority). LAN connections will drop when VRRP flips since you have...
View ArticleForwarding Protocols • Re: VRF-Lite with Mangle and dstNAT to reach multiple...
Besides and before the netmap line, I don't understand what are these settings:/ip routeadd dst-address=10.2.30.0/24 gateway=vrf30@vrf30add dst-address=10.2.40.0/24 gateway=vrf40@vrf40With these...
View ArticleGeneral • How to setup static ARP only
Hello,I've got a netPower 16P, and wanted to put all my ARP entry static on IP > ARP, but if I do so, and put ARP on reply-only for every interface (bridge too) every other device can continu to...
View ArticleBeginner Basics • Re: Newb Question on my topology
It was a left over unit we found, since it can run RouterOS we figured we can use it another site that has a failing port on a router.We'll go with more reputable brand. Thanks for the...
View ArticleGeneral • Re: VRRP Stuck in Master in both devices
Could anyone help me? Obi Wan?Statistics: Posted by Kandelabro — Wed Apr 03, 2024 6:16 pm
View ArticleClik here to view.
Forwarding Protocols • Re: BGP ECMP (multipathing)
Okay, confusion confirmed, although I can't rule out the confusion being in my head I don't understand what this has to do with ADD PATH.The OP (like me) wants to have the defaults received from two...
View ArticleGeneral • Re: Downgrading RouterOS
when i /system/packages/downgrade the system reboots but doesnt downgrade to 7.13You have to manually upload NPKs for all packages currently running (e.g. routeros and wireless) for the target version...
View ArticleRouterBOARD hardware • Re: CRS317-1G-16S+RM MPLS Support
I'm guessing that Marvell "NDA-licenses" the hardware features, and VXLAN and MPLS is simply to expensive.But yes, VXLAN/NVGRE with EVPN would have been a killer feature.Statistics: Posted by mada3k —...
View ArticleGeneral • Re: SSH "message authentication code incorrect" when...
I would not recommend using RouterOS SSH for anything more than device admin, it is proprietary and has had numerous bugs over the years and functionality of the SSH protocol beyond terminal access is...
View Article