General • Re: wireguard low performance at rb5009
any ideas where to start searching the issue?Statistics: Posted by haris013 — Tue Apr 02, 2024 7:17 pm
View ArticleWireless Networking • 60GHz security
Could not find any information regarding security of 60 GHz links. For the redundant WIFI link I can choose some options regarding security in security profiles. But that is not the case with 60 GHz...
View ArticleBeginner Basics • Re: DHCP Server - DNS blank or router IP
Kinda a preference thing IMO. Leaving /ip/dhcp-server/network's DNS blank is means "inherit" the /ip/dns ones. This allows default config to work... but often being explicit in config is more clear....
View ArticleRouterBOARD hardware • Gigabit auto-negotiation over 2-pair cable
It is a well-known issue for two devices with Gigabit Ethernet ports, when connected through a 2-pair cable (or a non-gigabit PoE injector in between) sometimes works properly (downgrades speed to...
View ArticleGeneral • Re: Wireguard DNS re-resolution script
Correct, since maybe 7.12??? not sure when but there is no longer a need to do this on the client (for handshake) peer to re-establish connectivity with the Server ( for handshake ) peer.Statistics:...
View ArticleGeneral • Re: Problem with Mangle Rule
Sure thing. Please use this virtual eraser to remove your mangles, this virtual pen to rewrite proper mangles, and these virtual scales, to help load balance your PCC.Statistics: Posted by llamajaja —...
View ArticleClik here to view.
RouterBOARD hardware • Re: CCR2004-16G-2S+PC NO USB, WHYYY!??
Looks like its missing many components, I wanted to add usb to mine as wellHere is a pic of the CCR2004-16G-2S+ "NON-PC"It looks like the switch chips have been "downgraded" compared to this still...
View ArticleGeneral • How to do Inter-VLAN Bridging with MikroTik?
Hi. I want to try and do an unorthodox thing on my home network.There's an awful lot of protocols that you would want to work on a home network that depend on a single multicast packet emitted from...
View ArticleBeginner Basics • Re: S2S problem
Hi!MTU problem ?Statistics: Posted by emunt6 — Tue Apr 02, 2024 9:24 pm
View ArticleGeneral • Enabling auto switch between ETH and WLAN
There is a following setup on Mikrotik map lite:eth1 - device management with winboxwlan1 - wifi access to internetl2tp2 - vpn serverwlan2 - network for clientswhere wlan2 exists only when wlan1...
View ArticleGeneral • Setup a single Mikrotik Router who does only VPN
Hello,hope you are all fine.I am wondering, if you can tell me if this possible.I have a well working network enviroment.I am thinking about to run a mikrotik as a client in a network.I would like to...
View ArticleWireless Networking • hAP AX3 5G range troubleshooting
I'm starting a new thread because the previous one is marked "Solved" - and it degenerated slightly. Please let's focus on the particular issue here - at least some hAP AX3 units appear to have...
View ArticleWireless Networking • Re: hAP AX3 5G range troubleshooting
Let's start by sharing your config.Statistics: Posted by infabo — Tue Apr 02, 2024 10:15 pm
View ArticleClik here to view.
Forwarding Protocols • Re: hardware offload of mpls, is it limited?
Mikrotik need offloading of the following MPLS operations:- Label Forwarding- Label Push/Pop/SwapFor not only one label, but multiple in Hardware and FastPath.This is a major feature set omission that...
View ArticleGeneral • Re: Setup a single Mikrotik Router who does only VPN
Easy to do, why not do it on the main router. Do you have a network diagram to share?Also is the WANIP on the upstream router publicly accessible??Statistics: Posted by anav — Tue Apr 02, 2024 10:33 pm
View ArticleGeneral • Re: RB5009: slow switching under certain conditions
Trouble is in HW - Marvel 88E6393X is bad chip - small 2Mbit buffer. If you count, you need at least 8Mbit. CRS305-1G-4S+IN uses 98DX3236 with !!! 24Mbit !!! buffer.Mikrotik can try emulate buffer by...
View ArticleRouterBOARD hardware • Re: RB5009 2,5Gbe problems
Trouble is in HW - Marvel 88E6393X is bad chip - small 2Mbit buffer. If you count, you need at least 8Mbit. CRS305-1G-4S+IN uses 98DX3236 with !!! 24Mbit !!! buffer.Mikrotik can try emulate buffer by...
View ArticleGeneral • Board Name: x86 Default string Default string
uptime: 32m14s version: 7.15beta9 (development) build-time: 2024-03-27 19:55:08 free-memory: 3652.1MiB total-memory: 4032.0MiB cpu: Intel(R) cpu-count: 2 cpu-frequency: 1777MHz cpu-load: 1%...
View ArticleGeneral • Re: 10Gtek SFP module ref ASF-GE-T auto negotiation problem with...
The problem is still happening with RouterOS 7.15beta9:As soon as I re-enable Auto Negotiation on interface sfp-sfpplus5 and sfp-sfpplus7, no link gets detected.This wasn't the case until I updated to...
View ArticleGeneral • Re: Cant connect SMB in mikrotik
I have format the sd card with gpt, and 1 ext4 partition, with my linux.Not with the router.And when i see your config, i see duplicate user guest..I have removed the duplicate user and i have...
View Article