Beginner Basics • Re: Help with configuration of a port.
So after testing everything: VODAFONE VOIP TRUNK WORKS FLAWLESSLY! YEEEEEEES!One small problem though:So like I said before I have some other voip trunks which work with regular internet connection...
View ArticleGeneral • Re: PowerBox Pro Yes or No?
First test.Defaulted a Power Box Pro and removed the base config.Made a bridge. Added all the ports. Added a DHCP client.Connected a WAP60 to port 5 and it powered on and linked up.Connected computer...
View ArticleBeginner Basics • BTH is not connected but it is transmitting
Hi everyone!Is it normal that my BTH interface is always transmitting (but not receiving) packets, even if no client is connected to it?Take a look to this:Captura de pantalla 2024-03-03 a las...
View ArticleGeneral • Re: Unstable clock on RB5009UPr+; critical,info ntp change time
How to do that?Reading around I've found a post talkng about possibile interferences between Mikrotic low precision cloud time service" and the NTP, maybe it's a bug of the newer versions, when a NTP...
View ArticleGeneral • Re: Wireguard doesn't work and no logs
The log problem has been solved on latest 7.14,now I still have sometimes problems with keys, all is written good but it doesn't work, I need to activate wireguard on my phone and paste again it...
View ArticleGeneral • Re: Wireguard on Windows (client), no gateway, can't ping router
With 7.14 Mikrotik has solved the log problem.The connection may still unstable, the problem is connected with the keys in my opinion, the relation between public and private key may change and it's...
View ArticleWireless Networking • Re: hAP ax3 Station Mode - disconnected reason code 3
Disconection hap ax2/ax3 in station mode with reason code 3 or 8 takes place when AP works in 5470-5725 MHz,It happens with hap ax2/ax3 in working with any AP wifi 6 from any vendors.When AP changes...
View ArticleGeneral • WireGuard useful learning [Linux]
YET ANOTHER SYSADMIN WEBSITEThe basics to know about wireguard routingIntroductionNow that we learned how to configure wireguard on multiple operating systems, let’s take a break and review what...
View ArticleBeginner Basics • Re: Struggling with Pages Won't Redirect to Hotspot Login
CGNAT has its own reserved IP range between 100.64.0.0 and 100.127.255.255.probably yes this is a CGNAT , is there any solve to that if it was a CGNATStatistics: Posted by Wan077 — Sun Mar 03, 2024...
View ArticleBeginner Basics • Re: ONLY FORWARDING RULE IS WORKING INPUT AND OUTPUT RULE...
Your picture shows nothing about how you've set up the firewall rules. Please provide your firewall rules. Also I want to mention if that helps: "WAN to LAN rule should be on the FORWARD chain instead...
View ArticleWireless Networking • Re: cAP AX Blocking Performance at gigabit?
1200 Mbits/s and 574 Mbits/s these streams can pass only on wifi ports of pure data there is half of it, so 1774 can not get to ethernet port.CAP AX judging by the specification can not power...
View ArticleBeginner Basics • Re: Have 2 sites, can VNC only one-way
Both routers get public IP (not fixed, but public) from actually the same provider, using PPPOE.I use no-ip DDNS, not setup on the mikrotiks since this is... complicated - but on other...
View ArticleGeneral • Ethernet ports on a CAP
I understand the general concepts behind CAPsMAN managed CAPs, but what happens to the ethernet interfaces on a device like a hAP Lite? Are those interfaces accessible or managed via CAPsMAN? Is it...
View ArticleGeneral • Re: RB4011iGS+ problem with VLAN mtu after reboot
I'd say it's a bug ... I'd somehow expect returning MTU to 1500 after disabling EOIP (if EOIP is carried over VLAN, then disabling VLAN will disable EOIP). But I wouldn't expect MTU to remain at 1500...
View ArticleWireless Networking • Re: RB-LHGLTE routing via LTE broken
Maybe I should add this to my question: Is there a test that I can run that check that all the hardware is fully functional?I find it hard to believe that the unit has faulty hardware when the mobile...
View ArticleGeneral • Re: Ethernet ports on a CAP
By default (when resetting a device and setting it into CAPS mode) all interfaces are added on the bridge.Therefor the interfaces are actually in a switch.CAPsMAN only manages the wireless...
View ArticleClik here to view.
General • Re: secure IPv6 and port forwarding?
or you'll have to set IPv6 addresses on server-like devices manually.If you use SLAAC/NDP on the LAN side, won’t these server-like devices get the same v6 address each time?In theory yes. But when...
View ArticleBeginner Basics • DHCP conflict
Hello! Ive got lame question but cant find answer by myself.What we got rb2011uas at 6.49.13. DHCP server with single pull 192.168.1.2-192.168.1.200. Some clients get addreses in ip-pool-used adreses...
View ArticleGeneral • Re: Green LED is not lit- L009UiGS-RM
Generic troubleshooting in these cases.Try with another cable, first thing.Then, since you have several free ports, try on another port.The lighting of the ports leds should be independent from port...
View ArticleBeginner Basics • Re: HD space questions
and am wondering if a usb key would increase the total as HD space, or if it would be counted as different space.Added USB key counts as separate HD space. It can be used for everything that allows to...
View Article