Beginner Basics • Re: Hap mini as wifi client "switch"
Hello holvoetn. Thank you for your help.I've followed the last bit since it is similar to my setup. I've managed to connect the Hap Mini to the access point and get an IP from the DHCP server on the...
View ArticleGeneral • Re: Is architecture emulation under docker supported?
If you search the forums, someone has made a docker container for the cli netinstall program.They have put in a (x64 I think) emulator into the container (it is smaller than the netinstall...
View ArticleGeneral • CRS310-8G-2S+-IN expected internet performance?
I had high hopes for this device but I believe I should have purchased something else.I posted a similar thread but on a lesser used sub-forum and hope to get more feedback here in the General forum....
View ArticleGeneral • Re: CRS310-8G-2S+-IN expected internet performance?
You should have bought something else. CRSes are switches first, not routers, even if they can do routing. With the advent of L3 hardware offload they can route at wirespeed, but not all can also do...
View ArticleClik here to view.
RouterBOARD hardware • Re: i have issue with cpu-temperature
I had a similar problem with the CCR1036-12G-4S. The device was purchased in 2014 and all this time (that is, 10 years in a row) it worked around the clock. The first time we had to repair it was in...
View ArticleBeginner Basics • CRS3xx (low?) Bandwidth Test Performance
Hi,in my home network I have a 3rd party router (Firewalla Golde SE) and two CRS switches daisy-chained one after another, i.e. Router -> CRS328 -> CRS326.The two CRS switches are interconnected...
View ArticleBeginner Basics • Re: CRS3xx (low?) Bandwidth Test Performance
please use iperf it was a known fact that bandwidth test inside mikrotik will eat your CPUStatistics: Posted by loloski — Thu Feb 08, 2024 1:43 am
View ArticleBeginner Basics • Re: Mikrotik Services across VPN
Is there any easy way to source Mikrotik activities from the LAN interface as opposed to where the default 0.0.0.0/0 points?It uses the IP of the interface closest to the chosen gateway.The easiest...
View ArticleGeneral • Re: DMZ ping and hide from traceroute?
I'm a newbie and wanted to hide my ISP Router. Can you provide a physical configuration for Mikrotik Thank you in advance...Statistics: Posted by dice4real — Thu Feb 08, 2024 3:15 am
View ArticleBeginner Basics • Re: Can't connect to my cloud switch
Let's start over. You have a CRS310-8G+2S+IN that you are unable to connect to. Is that correct?you need to connect a laptop or computer set with thee IP of 192.168.88.10 (or anything other than 1) to...
View ArticleRouterOS beta • Re: v7 inter VRF route leak doesn't work for local IPs
@spippan There must have been a change in 7.14beta10 maybe the following line?*) route - fixed gateways of locally imported vpnv4 routes;I can now ping endpoints between different VRFs using the route...
View ArticleGeneral • all zeros 00:00:00:00:00:00 on MAC address. This indicates an IP...
In Mikrotik DHCP server all zeros 00:00:00:00:00:00 on MAC address occupied lot of IP addresses. What is the problem? ip dhcp-server/export # feb/08/2024 10:58:59 by RouterOS 7.7# software id =...
View ArticleBeginner Basics • Can't access flash/webaccess folder.
Hi! I am currently practicing Mikrotik RouterOS. I have a problem I can't seem to figure out. I have 2 bridges with different ip or ip subnets. 1st bridge has 10.0.0.1/24 ip range while 2nd bridge is...
View ArticleForwarding Protocols • Re: Status of ROS V7 for BGP, MPLS, VPLS
I can say even more since ros 7.14 it will be no firewall in PE routers . PE-CE segment will be not protected. will be not possible to SNAT and DNAT VPN4 traffic on PE router.Statistics: Posted by...
View ArticleClik here to view.
General • fetch error since 7.13: "failure: ERROR parsing http: there...
Hello,since 7.13, my fetch script returns this error when fetching a webpage: "failure: ERROR parsing http: there was no content-length or transfer-encoding"This fetch script calls a page from an...
View ArticleSwOS • Re: [Bug] CSS610-8P-2S+IN and PoE+
We have released a fix inside RouterOS 7.14beta10 regarding the issue and have got positive feedback. See viewtopic.php?t=202612 *) poe-out - improved 802.3at classification and measurement accuracy;...
View ArticleGeneral • Re: fetch error since 7.13: "failure: ERROR parsing http:...
Issue should be fixed in latest 7.14 beta versionsStatistics: Posted by normis — Thu Feb 08, 2024 9:28 am
View ArticleGeneral • Re: Load balancer via ECMP or PCC on 2 starlinks
Hello again,So... I set up the VRF and had the next trouble with load balancer./ip vrfadd interfaces=ether2 name=Groupe-2-Routeadd interfaces=ether1 name=Groupe-1-Route/ip addressadd...
View ArticleRouterBOARD hardware • CUBE 60 AC vs CUBE 60 PRO SA
Hi,I have 2 locations. 1. location is WAP 60G as AP2. location is CUBE 60 AC as clientI want to connect 3. location and I have 2 options:1. option is to buy CUBE PRO SA use it as AP and WAP 60G use as...
View ArticleGeneral • Wake up lan 7:00pm
Hello:I'm looking for a script that allows me to wake up a PC every day at a certain time.eth2 mac: xx xx xx xx xx wake up 7:00 every dayStatistics: Posted by Rey2023 — Thu Feb 08, 2024 9:41 am
View Article