RouterBOARD hardware • Re: MikroTik CRS309-1G-8S+INL -- 10G RJ45 Transceiver?
For those interested in adding fans to the CRS309, take a look at this video for some inspiration: https://www.youtube.com/watch?v=ZDTv6NGBhYkOf course there are more elegant ways, but this guys'...
View ArticleGeneral • Re: hEX PoE router configuration changes disappearing
…an older ROS version and also the file is no longer available for download.Doubt it.Statistics: Posted by tangent — Sat Jan 13, 2024 9:01 pm
View ArticleBeginner Basics • Re: Unable to access the router via L2TP
I don't really understand why? default gateway IP 192.168.1.1, remote IP when connected via VPN 192.168.1.2. It's /24 network so I am on the same subset.Using the same subnet for L2TP connections as...
View ArticleGeneral • Re: IP and route configuration for /28
The standard way to set this up would be to assign 180.2.220.50/28 to your WAN bridge with a default route to 180.2.220.49. The servers would be assigned addresses of 180.2.220.51/28 (likewise .52,...
View ArticleClik here to view.
General • Re: Mikrotik rb750gr3 fasttrack and wireguard issue
Please make configuration for me I will just copy paste in mikrotik terminal please Method 1:add action=fasttrack-connection chain=forward comment="fasttrack not tunneled"...
View ArticleGeneral • Re: Slow upload speed only with RB5009
I experienced this also/similarly; just wanted to say for me it was fixed by downgrading to 7.9.2, don’t know why. My only comparison was a RB4011 I had at a different location that seemed to have no...
View ArticleGeneral • hAP AX3 2.4 WLAN does not work after upgrade to 7.14b6
Hello,since I can not post under beta subject (and while I've reverted back to 7.13.1...), I will allow myself to post my question here.So I did upgrade to 7.14b6 on following devices: hap ac3 (works...
View ArticleWireless Networking • Roteador hAP ax³
Boa Tarde, comprei um roteador hAP ax³ porem não estou conseguindo configurar o wi-fi, não fica disponivel o ssidStatistics: Posted by RodrigoRPM — Sat Jan 13, 2024 10:02 pm
View ArticleBeginner Basics • Public SFP no route to host
Ive got the RB3011 and I've installed it in a rack in a DC near me.they've assigned me a range of public IPs, given me the gateway ip, netmask, etc.the connection is fiber so I using sfp1, however...
View ArticleWireless Networking • Re: Roteador hAP ax³
First search result for "SSID" in the docs…Statistics: Posted by tangent — Sat Jan 13, 2024 10:42 pm
View ArticleWireless Networking • Re: Periodic "Access point temporarily full"...
But I don't really understand what you mean by 'station preference'...If I understand this right (but I may be wrong), then in WPA2 management frames protection is optional and is only used if both AP...
View ArticleBeginner Basics • Which dstIP to use in f/w rule for dstNAT packet?
To set a firewall rule in the Forward chain for a packet that is dst-NAT'd, you can specify a destination IP address. Is this address supposed to be the original packet dstIP as it arrives (the public...
View ArticleGeneral • Re: OpenVPN-Client Connection Problems
Same problem here. On 7.12.1 was no problem.Statistics: Posted by draxlerzoltan — Sat Jan 13, 2024 10:58 pm
View ArticleGeneral • Re: Netinstall sending offer, but not installing
1100ahx4formatted flash now netinstall is not installing - sending offermissing probably the netbios setting mentioned above all other settings Ive already triedtried many combos of the mentioned and...
View ArticleRouterBOARD hardware • RB912UAG-2HPnD-OUT with lte usb as accespoint for WIFI...
Hello, Recently I encountered the problem of choosing an accesspoint with LTE for WiFi cameras. In my location, there are no interferences or high speed requirements, only about 10-20Mb/s. It would be...
View ArticleBeginner Basics • Re: Which dstIP to use in f/w rule for dstNAT packet?
Look at packet flow reveals that DST-NAT is done way before firewall filter rules ... meaning that firewall filter rules will see dst-address with already replaced values.And, to make things complete:...
View ArticleBeginner Basics • Change VLAN MAC address - which is the current recommended...
Hello,I hope you are well.As far as I skimmed the forum and help, it looks like there are two up-to-date ways to change the VLAN MAC address 1. create a bridge with a custom MAC and slave VLAN to it -...
View ArticleVirtualization • Re: OpenWrt for ARM-based RB1100AHx4
I am also interested.@Ingdaka bro relax it's a good thing the OpenWRT comes in handy too often. He is just asking if someone is already knowledgeable about it. He is not asking you to support it in an...
View ArticleGeneral • Re: The problem that upnp does not work
udp port 1900tcp port 2828Do I open these ports on the input chain? And the ports are "destination port"?Normally the default "accept on input from LAN list" rule would cover uPnP negotiation. But if...
View ArticleRouterBOARD hardware • Re: RB912UAG-2HPnD-OUT with lte usb as accespoint for...
Isn't the WAP LTE kit:https://mikrotik.com/product/wap_lte_kitthe device more similar to your description/requirements?Personally I would not trust a USB external modem on a device that is outdoor or...
View Article