Wireless Networking • Re: bound client to specific AP by mac adress by CAPsMAN
Couldn't you use the ACL in caps-man and allow it on the cap you wanna allow. Then put a rule right after that to deny it from any interface. I can't, as I've told before. There is no way to control...
View ArticleScripting • Re: More Than one user per mac
It's there...without RADIUS the number of devices is in the "Hotspot User Profile". You will need different profiles, one for each different number of devices. with RADIUS (e.g. User Manager) , the...
View ArticleGeneral • Re: CGNAT IP range conflict between Starlink and Tailscale...
Some suggestions: Set up your own TailScale address pool, use IPv6, or switch to ZeroTier. RB5009 has built-in support for ZeroTier which allows you to pick any or multiple private subnets and also...
View ArticleGeneral • Re: PPPoe fast download, slow upload
I can't find the mru and how to disable please help meHelow my friend do you fix your problem do you find your solution to disable the MRUStatistics: Posted by CHUPAPEE — Thu Mar 21, 2024 1:33 pm
View ArticleGeneral • Re: Dualboot, windows gets ip, linux does not
That was it. In /interface bridge vlan, I didn't have my ethernet port set as untagged. Thank you very much!If a port of bridge has pvid set, then it's automatically added as untagged port to...
View ArticleGeneral • Re: CHR or Ethernet router?
Surely there are MT routers which can do IPsec with throughputs higher than 200Mbps. But only if they support appropriate HW offload functions (not all of them do). All MT routers have product pages...
View ArticleWireless Networking • Re: Audience different revisions showing different...
I'd say this means that it's possible to set antenna-gain to 0 (AFAIK default is unset which means minimum allowed value or 0 if there's no minimum) and hence you can see 5dB higher actual Tx power.If...
View ArticleGeneral • Re: Winbox on Mac always false-starts?
just went to post about this exact issue after switching back to mac from windows after 6 yearsusing the 'Open in new window' seems to do nothing, then 30 seconds later, displays the 'couldnt connect,...
View ArticleWireless Networking • Re: Is it possible to install WiFi package on L009UiGS-RM?
I haven't tried the new capsman (yet; I only have one wave2 device running wireless at the moment), but in old capsman one could configure location of upgrade packages ... which could contain files...
View ArticleRouterBOARD hardware • Re: CCR1036 temperature "issue" cause reboot.
Got a CCR1009 here with these symptoms (temperature reboot, though unit is cold). Replaced bulged caps C1442 and C1443 (680µF/10V) with Panasonic FR and it worked again. System Health showed voltage...
View ArticleRouterBOARD hardware • Re: Many PSU failures in CCR1036
[admin@MikroTik] > system/health/printColumns: NAME, VALUE, TYPE # NAME VALUE TYPE 0 power-consumption 50.8 W CCR1036 (the CCR1036-12G-4S variant) has rated max power consumption at 60W. So the...
View ArticleSwOS • Error when in Host Tabs
I go to try and check if I can find what ports my APs are connected to, and it doesn't let me, I was wondering if anyone has seen this error before.. Im on firmware version 2.18ERROR: SyntaxError:...
View ArticleWireless Networking • Mu-Mimo for cap ax
Hi everyoneI didn't find anything about WiFi 6 and MU-MIMO in https://help.mikrotik.com/docs/display/ROS/WiFiall the thing that the document said Is Qcom-ac supports MU-MIMO and beamformingDOES...
View ArticleGeneral • Re: low signal client in CAPSMAN?
I have clients connected to 2GHz and 5ghz on my MAntbox 52 15s with <86db without losses and disconnections applying access rules from each AP , but when I apply CAPsMAN it is the problemIs the...
View ArticleUseful user articles • Re: 📌 Tool: Using Splunk to analyse MikroTik...
btw, I still see a very strange thing ...my gateway router (CCR1009) stops sending log info after a couple of hours working fine.nothing arrives at the splunk machine.all other MT devices do continue...
View ArticleSwOS • Re: Error when in Host Tabs
I am assuming you see this on CSS610 running latest SWOS-Lite 2.18 ?Issue has already been reported in that release thread.Statistics: Posted by holvoetn — Thu Mar 21, 2024 4:13 pm
View ArticleGeneral • Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Well, I can't speak for others, but since I upgraded to version 7.13, I haven't encountered any issues (it's been almost three months now). I have multiple of these devices running continuously at...
View ArticleContainers • Re: Homeassistant as container and homekitbridge setup
You can treat VETH the same as a ether1 etc ports. So it can use in your "main" (or only) bridge, and using vlan-filtering=yes. Possible to make a trunk (e.g. /interface/bridge/vlans as a tagged=),...
View ArticleGeneral • Re: lo-Interface loopback
Can you create a second proper "type=loopback" interface or do you need to still do it the old school way of creating a bridge interface with no ports?Statistics: Posted by JJT211 — Thu Mar 21, 2024...
View ArticleWireless Networking • Re: Mu-Mimo for cap ax
https://imgur.com/a/QbR9jltStatistics: Posted by akakua — Thu Mar 21, 2024 5:28 pm
View Article