Beginner Basics • Error "NO CARRIER" when attempting an outgoing...
Hello! As we know, the ATL LTE18 kit device has a modem R11mL-EG18-EA (i.e. Quectel EG18-EA) inside. This modem, based on the documentation, should support outgoing calls (both voice and data) via the...
View ArticleWireless Networking • Re: cAP ac Disk Space
Given cap AC only has 16Mb flash whereas hap AX/AX2/AX3 (which hap AX ??) have 128Mb, yeah, that's normal.But... large part of that "problem" is because starting 7.13 ROS-package became quite a bit...
View ArticleForwarding Protocols • BGP 7.14.1
Hello Everyone,I am testing BGP ECMP and underlay advertised loopback under with ECMP which correct, the issue can't figure out how to set target or target-scope to make second link as backup...
View ArticleRouterBOARD hardware • Re: hAP ac2 not working after 7.14 update.
About the problem with the upgrade from 7.13 to 7.14 on my hAP ac2's.I have 3 of these devices.Two of these won't upgrade from 7.13 to 7.14 (or 7.14.1) via the normal upgrade procedure in Winbox...
View ArticleClik here to view.
Beginner Basics • VLAN On Main Router + 2 HAP
Hello,I've been trying to get the VLAN on my network up and running for over two weeks now, see the following diagram. The only place where my VLAN works is through CAPsMan and then on the ports in...
View ArticleClik here to view.
RouterBOARD hardware • Re: Everything but hAP ax2 is pointless?
I'm sorry but the current product range is ridiculous. Every single product is essentially a trade-off. Regardless of price, to get one feature you need to give up another. The hAP ax2 with USB and...
View ArticleContainers • Re: Did veth <-> disk slowed down in 7.14?
from which version did you upgrade?is this arm64 device?Statistics: Posted by antonsb — Thu Mar 21, 2024 10:44 am
View ArticleGeneral • Re: RB4011 VLAN traffic getting dropped
Thank you for all responsesI have changed the VLAN1 to VLAN50 with no effect.Still Virtual Machines going through host network in VLAN50 are unable to communicate back to clients in VLAN52.I do not...
View ArticleGeneral • CVE-2024-2169 - Is RouterOS 6 affected? and/or RouterOS 7?
Hey all,Today I came across the CVE-2024-2169 and Mikrotik confirmed to be affected.https://www.kb.cert.org/vuls/id/417980''Vendor StatementOur TFTP service is affected, we have resolved the issue in...
View ArticleBeginner Basics • Re: making VLANS + Ubiquiti WIFI
If you have IoT network then why blocking some devices... Just block IoT VLAN access to the other VLANs (but leave communication open to the HA server)Did you created VLANs on Mikrotik ? If not here...
View ArticleGeneral • Re: Site-2-site L2TP IPSEC VPN speed issue
It was a long time ago I had speed problems with my L2TP IPsec link and changing MAX MTU to 1400 fixed it for me .Statistics: Posted by ramirez — Thu Mar 21, 2024 11:28 am
View ArticleWireless Networking • How to detect failed WiFi Authentication
Hello,is there any simple way to detect, log that a device was not able to connect to a WiFi due to wrong credentials?Currently, I see only, that detecting failed WiFi Connecting (WPA2-PSK) can only...
View ArticleGeneral • Re: CVE-2024-2169 - Is RouterOS 6 affected? and/or RouterOS 7?
You already answered your own question, it was fixed back in January when the mentioned beta was released. So MikroTik is not affected. Also, more importantly, this is a "non issue" since normal...
View ArticleBeginner Basics • Re: MACVLAN on top of current VLAN
After successfully configuring my network with VLANs, I had to change the topology, and now I have a situation where one ethernet port has to serve two machines that are in different VLANs. I tried...
View ArticleGeneral • Suggestion on VLAN Termination
Hi All,We have the following setup 1. CRS518-16XS-2XQ Port16 - Connect to the provider network2. CRS518-16XS-2XQ Port15 - Connect to the CCR22163. CCR2216-1G-12XS-2XQ Port12 Connects to...
View ArticleRouterBOARD hardware • Re: CCR1036 Power Supply
What about those users mistakenly buying the CCR1036 R1 ? i experienced 4 times of PSU failure since 2018, average 1.5 years a blow.I would like to know more about that... You took your CCR1036 to the...
View ArticleGeneral • Re: Terminal paste issue
Ok , but once text is copied (from notepad, word, wordpad, etc. ) it gaves unwanted behavior online when pasted into winbox, all’ is fine via network connections like telnet or ssh, Where is the real...
View ArticleGeneral • Re: OpenVPN Server providing IPv6 to clients
I am trying the same; did you ever succeed in setting up your OpenVPN server on RouterOS to provide IPv6 to clients?Statistics: Posted by adron1111 — Thu Mar 21, 2024 12:35 pm
View ArticleBeginner Basics • Re: Reduce timeout of Safe Mode to less than 9 minutes
Has this changed since OP asked?Statistics: Posted by Scoox — Thu Mar 21, 2024 12:42 pm
View ArticleGeneral • Re: Can't Connect devices VPN Connection
In OpenVPN its something called push route.I think i have seen some changelog saying it's now supporting push route.So if you going into "OVPN Server" you have "Push Routes" there you have to add the...
View Article