Wireless Networking • WiFi and VLANs
I am trying to setup a 951G-2HnD to achieve the following:Native VLAN 1(public) in all ports but ether2;Ether1 -> VLAN 1 (native) and VLAN 100 tagged (802.1Q); Port 2 -> native VLAN 100 (PVID...
View ArticleWireless Networking • Re: WiFi and VLANs
The relevant part of my configuration is as follows.Tricky to only show part of config if you don't know yourself where the error might be.Where is IP setting for device itself ? I do see an IP...
View ArticleScripting • Automatic SMS sending triggered by an external command
Hello,I am a fresh Mikrotik user (R11e-LTE6) and I need help or suggestions about the possibility of sending very specific SMS (if it is possible).My application is the following: I have a sensor...
View ArticleGeneral • Re: Viasat Modem
I have one site with a Viasat backup, and recall the modem being kinda dumb about things. So switching between PC and Mikrotik may not be the best test, as it likely locks the PC's MAC address to the...
View ArticleBeginner Basics • Re: How to configure and debug mikrotik CRS326 24 switch to...
well, yes. I expect basic routing capabilities and stable. This is non working config Code: # 2024-03-10 23:35:14 by RouterOS 7.14# software id = 2XQ4-E7TP## model = CRS326-24G-2S+# serial number =...
View ArticleGeneral • Re: Feature requests
Currently UPnP and Hairpin NAT does not work together. It is because the dynamic dst-nat rules created by UPnP has the in-interface=<external> filter. It would be nice to remove this filter from...
View ArticleForwarding Protocols • Redundant eBGP
Hello everyone,I have a situation to resolve and I'm looking for practical advice.I state that I have an AS number and a public /24 subnet to be announced.We currently have two upstreams, each of...
View ArticleGeneral • Re: UPnP and Hairpin NAT
I raised the issue in both places. Thank you both!Statistics: Posted by lanslot — Mon Mar 11, 2024 3:20 pm
View ArticleGeneral • Wireguard tunnel local LAN
I have a Mikrotik hAP2 AC2 with routerOS 7.9.I have an ubuntu server on AWS that i use as a wireguard VPN. I am able to connect to the server using different Linux, Windows, Android clients and when...
View ArticleGeneral • Re: Wireguard tunnel local LAN
Best to provide export of your config.Statistics: Posted by holvoetn — Mon Mar 11, 2024 3:39 pm
View ArticleGeneral • Re: 2 wan setting
ok thank you very much for the adviceStatistics: Posted by mikeleord — Mon Mar 11, 2024 3:42 pm
View ArticleGeneral • Re: DoH server connection error: Host is unreachable
Anything ever figured out on this? Starlink is the ISP on this issue which could add some flavor.Statistics: Posted by mrarmyant — Mon Mar 11, 2024 3:51 pm
View ArticleBeginner Basics • Public IP on LTE USB dongle
HelloI can not understand this behaviour.I have a USB LTE dongle k5160Plugging this dongle in the old router, I always get a public IPAt the same, in a Windows 10 laptop, even without specific...
View ArticleGeneral • CCR2216 Tunnel Throughput
Hi everyonewe have a CCR2216 with about 15-20 different tunnels on it (GRE-IPIP-VXLAN) and the maximum total download speed doesnt go past 4.1Gb.i looked at the resources and looks like 4 of 16 cpu...
View ArticleBeginner Basics • Re: WireGuard Subnets
@anav,Thank you for the response. I am trying to learn about this more. Can I modify the exported config file in a text editor, upload the file in Winbox and run "restore" with the new file? Don't...
View ArticleWireless Networking • Re: WiFi Home Configuration Suggestions
Then I would start with two capaXs on the outer positions and see if that satisfies the requirements.Statistics: Posted by anav — Mon Mar 11, 2024 4:44 pm
View ArticleScripting • Re: Automatic SMS sending triggered by an external command
If all the logic/detection happens on the PC, the question can be reduced to "How do I make a Mikrotik router send a SMS from a PC?"Maybe SSH:viewtopic.php?t=174803Or REST...
View ArticleBeginner Basics • Re: Public IP on LTE USB dongle
It seems that in some way the USB dongle is natting...Statistics: Posted by stef70 — Mon Mar 11, 2024 5:19 pm
View ArticleGeneral • Re: Firewall - Check - No Portforwarding
I actually got most of it from here https://help.microtik.com/docs/display/ ... d+Firewall.If the firewall is perhaps better, I tried to rebuild it again and sorted it:Code: /interface listadd...
View ArticleScripting • bridge admin-mac on terminal
Hello,how to change admin-mac using terminalCode: [admin@Mikrotik] > interface/bridge/edit Lan01 admin-mac=00:00:00:01:00:01expected end of command (line 1 column 47)Statistics: Posted by vmnx —...
View Article