Clik here to view.
General • Re: hapAC2 - Out of HDD space/safe free disk space
@mkx - ouuu, that doesnt sounds good. Hopefully "my spare setup" with 650kb free space will last till i found some replacement for 4011 But now the "Mantbox" makes me even more scared :-/ Is not the...
View ArticleGeneral • Re: [Discussion] MikroTik configuration abstraction complexity
Mikrotik is very good at making hardware and software products for people that do not have access to "Wall Street Funding". Mikrotik will never be Cisco, Juniper or other "Enterprise" Vendors. Please...
View ArticleRouterBOARD hardware • CRS310-8G+2S+ bad 2.5G ethernet port?
Hello!Has anyone experienced bad-ports from the factory?I have one port on one of two freshly-out-of-the-boxes CRS310-8G+2S+ switches that absolutely won't maintain a link at 2.5G on ether5. That port...
View ArticleRouterBOARD hardware • RB4011 - Ports 1-5 Going down?
I have had now two different RB4011 routers running 7.12.1 that have had ports 1-5 (same switch chip) go offline for seemingly no reason in the last 3 weeks. A reboot of the router fixes it.Base...
View ArticleGeneral • Re: RB 4011 ports 1-5 occasionally fail after upgrade to 7.
I am curious if 7.13.x fixes it. I just have had in the last 3 weeks two separate RB4011 routers running 7.12.1 do the same thing.Both were new routers that were set to no configuration after...
View ArticleRouterBOARD hardware • Re: RB4011 - Ports 1-5 Going down?
Found another thread with the same issue.viewtopic.php?p=1059106#p1059106Of the two routers this happend to it is odd as one was installed on 9-29-23 and it was fine until the first port lockups on...
View ArticleRouterBOARD hardware • Re: CRS310-8G+2S+ bad 2.5G ethernet port?
What ROS are you running ?Maybe it's best for you to connect your 2.5G device to ether5, enable auto negotiation if you disabled it and create supout.rif file and send it to support so they can see...
View ArticleWireless Networking • Re: Cannot connect to cAP AX on 5ghz
Thanks Gentlemen, OK, now I can connect with BOTH Laptop and phone on the 5Ghz. So Now I want to make this hAP ax2 I just bought, connect to the cAP ax I have. The cAP ax should be the AP (Multiple...
View ArticleClik here to view.
Scripting • Change script to new time format
Hi, everyone:)Who can help me to transform this script for delete expire hotspot users to new ISO time format(I made a mistake to update Router OS to 7.12.1 )?:local dateint do={:local montharray (...
View ArticleGeneral • Traffic Flow
Hello, when i enable the traffic flow why on the flow collector the source is natted so the source is our public ip and not use the real client ip?Statistics: Posted by handiansudianto — Wed Feb 28,...
View ArticleClik here to view.
RouterBOARD hardware • CRS310-8G+2S+ with free flying heat sink
Got surprise - after CRS310 worked in vertical state (it is allowed state due to we have corresponding wall mount holes on the case) I heard that fan started work much noisier even if no any traffic...
View ArticleWireless Networking • Trunking Cube Pro
Dear friends,Recently I bought a pack of Wireless Wire Cube Pro (This is a pre-configured kit of two Cube 60Pro ac devices).Here I created a map. Two Cube 60Pro ac are connected together and on both...
View ArticleWireless Networking • Re: Trunking Cube Pro
Use this absolutely great post and see all connections as trunk ports:viewtopic.php?t=143620Statistics: Posted by erlinden — Wed Feb 28, 2024 9:37 am
View ArticleClik here to view.
Wireless Networking • mAP lite connect as cliente to network 802.1x WPA2...
Hello,now I have a Mikrotik mAP lite connected as a client, which works fine as I have WPA2 PSK protection.Now I need to connect these mAP lite to a network where the security is WPA2 Enterprise...
View ArticleClik here to view.
Useful user articles • Re: HOW TO: mDNS and SSDP over Wireguard
One approach for ZeroTier is to use the flow rules to restrict the network to ONLY multicast discovery (e.g. 224.0.0.0/24) & then bridge ZT interfaces to the desired VLAN. More conceptual here, I...
View ArticleRouterBOARD hardware • Another model
in case of any interest - another model.Harder to disassemble - tight connection. Darker body color. Blue light diode more bright.Works as expected. Both able to POE-IN POE-OUT set. Same jack 5.5mm x...
View ArticleVirtualization • Re: CHR using Apple Virtualization Framework (via UTM)
I am glad that my work help you resolve your problem. Hopefully MikroTik will provide us with uefi image packaged by them without this ugly workarounds. More and more modern hypervisors stop providing...
View ArticleGeneral • Re: RB5009 Power Issue
Same for me but on version v7.13.5I never had this before v7.13 the router just randomly reboots as if power went out. any solutions?Statistics: Posted by RSE — Wed Feb 28, 2024 11:09 am
View ArticleGeneral • How to use fe80::1 (IPv6 Link-Local) via VRRP to provide redundant...
It's somewhat common to use fe80::1 as link-local address to provide default gateway functionality to a segment.So I wanted to configure this on a routers interface as (an additional) link-local...
View ArticleGeneral • Re: How to use fe80::1 (IPv6 Link-Local) via VRRP to provide...
I think you should use ULA (Unique Local Address) for this...https://en.wikipedia.org/wiki/Unique_local_addressStatistics: Posted by eworm — Wed Feb 28, 2024 11:16 am
View Article