I am curious if 7.13.x fixes it. I just have had in the last 3 weeks two separate RB4011 routers running 7.12.1 do the same thing.
Both were new routers that were set to no configuration after upgrading from factory FW to 7.12.1. They were then configured manually.
Maybe an issue with the switch chip as ports 1-5 are on one switch chip and 6-10 on another.
I have opened a ticket with Mikrotik but I did not capture a support file before rebooting so I do not have that to send them.
If it continues I either need to switch them to an RB5009 (I have had one up for months with no issue) or downgrade them to ROS6 as I have an RB4011 on ROS6 that has been solid for years.
Both were new routers that were set to no configuration after upgrading from factory FW to 7.12.1. They were then configured manually.
Maybe an issue with the switch chip as ports 1-5 are on one switch chip and 6-10 on another.
I have opened a ticket with Mikrotik but I did not capture a support file before rebooting so I do not have that to send them.
If it continues I either need to switch them to an RB5009 (I have had one up for months with no issue) or downgrade them to ROS6 as I have an RB4011 on ROS6 that has been solid for years.
Statistics: Posted by terintamel — Wed Feb 28, 2024 2:51 am