RouterBOARD hardware • Re: New L11UG-5HaxD
https://mikrotik.com/product/l11ug_5haxdStatistics: Posted by honzam — Sat Feb 17, 2024 12:04 pm
View ArticleGeneral • Accessing/Manage multiple networks locally
Hi,I have a Mikrotik RB750Gr3 added right after ISP router, which doesn't allow much customizations.I have added two separate networks setup in Mikrotik and both access Internet via single WAN1. HOME...
View ArticleGeneral • Re: Accessing/Manage multiple networks locally
The simplest option is to plug into the LAB router wired.The complicated option is to swap the roles of the WiFi router and the LAB router, but if I'm reading your post correctly, that isn't possible....
View ArticleScripting • Re: Script DHCP Lease to Simple Queues don't work since update to...
I have almost the same problem.I have this script but its not working in V7/queue simple add max-limit=5M/25M name="Total_Clients" target=10.4.29.0/23:local child "MacAddr - $leaseActMAC":if...
View ArticleVirtualization • Re: CHR Hosted in Azure?
Ok, and how did you tackle that ?Starting from which VM ?Statistics: Posted by holvoetn — Sat Feb 17, 2024 8:10 pm
View ArticleBeginner Basics • Re: LXT-010S-H from LEOX and VoIP Vlan config
Could you give more details about your setup - which will be your trunk port and which your access ports? Also, why do you have so few firewall rules?Statistics: Posted by TheCat12 — Sat Feb 17, 2024...
View ArticleGeneral • hAP ax lite LTE6 - no option for ipv4-ipv6 in APN
Morning all.I got a hAP ax lite LTE6 in the boot of my car, being used to connect my Dash cam and other bits to the internet. My mobile carrier, GoMo Ireland, have enabled IPv6 on their network. On...
View ArticleGeneral • Re: hap ax^2 does not provide full speed connection
configuration isa secret configuration?Statistics: Posted by baragoon — Sat Feb 17, 2024 8:30 pm
View ArticleGeneral • Bug? Simple queue causes reboot failure
Hi, I think I might have hit a bug in ROS 7.13. I have an installation with 3 hap ax2 devices (2 APs and 1 router). When I add a simple queue to the configuration to limit the bandwidth of the guest...
View ArticleGeneral • Re: Bridge and VLAN Interface on bridge MTU problem : MTU needs to...
We should be able to put the same MTU as the L2MTU.Generally setting MTU to a random value is wrong. Generally all devices in same IP subnet (which talk to each other without gateway) should have the...
View ArticleGeneral • Re: RB4011 / hEX routers upgrade & VPN connections
The logs in question are due to turned on logging on some of the firewall rules, an input chain one. For the secondary questions, in theory there should be no disturbance of the IKEv2 connection and...
View ArticleWireless Networking • hapax3 wifi 1 & 2 keep disconnecting
Good day!I'm semi new to Mikrotik so please bear with me. I have a hAP ax3 that is running ROS 7.13 & wifi-qcom 7.13. I have set up the wifi with some very basic configurations. It doesn't matter...
View ArticleWireless Networking • Old wireless driver compatibility issue
I'm configuring a hAP ac2 as a wireless client and ran into a peculiar issue. When I do a scan, I don't see some networks, including my own 5GHz AC access point sitting right next to the router. I...
View ArticleWireless Networking • Re: Old wireless driver compatibility issue
Which channel is used by AP (running wifi-qcom-ac driver)? I believe that wifi driver supports U-NII-3 channels (5720MHz and upwards), it seems that they are even preferred. Legacy wireless driver...
View ArticleGeneral • RouterOS - Simple WireGuard Client Setup
Hi All,I wish to setup a simple WireGuard client on my router (hAP ax lite LTE6) that will give me a static external ip address from the host network.I can get this working very simply on my windows...
View ArticleWireless Networking • Audience "wifi3" goes in a unwanted state...
Hellomy Audience become after a while running to a "unwanted state" with interface "wifi3"."wifi3" is not correct working after a while.At a power down / startup the system all 3 interfaces works...
View ArticleGeneral • Re: Bug? Simple queue causes reboot failure
As you seem to understand the concept of VLAN...why do you use mutliple bridges?I would like to advise you this topic, which gives really great suggestions on VLAN:viewtopic.php?t=143620Will continue...
View ArticleGeneral • UPnP not working in ROS 7.14RC1 ?
Seems like UPnP is broken in ROS 7.14RC1.Sometimes the dynamic rule appears, sometimes it does not appear.NAT PMP seems to work correctly.Am i alone ?Statistics: Posted by FIPTech — Sat Feb 17, 2024...
View ArticleBeginner Basics • Pihole - NAT firewall Rule not redirected static DNS
Hello everyone, I've tried several times, made various attempts, but I can't get out of it.I have a Pihole docker on mikrotik.Pihole works.If I turn off the Pihole docker google chrome gives me this...
View ArticleGeneral • Re: CRS354-48P-4S+2Q+ traffic problem on ports 1 to 8
Hello,any progress with version 7.13.4 or are there still problems?We are thinking of buying 2 switches for the company and after reading this thread I have no confidence in CRS354.I have been...
View Article