Hello all
Been scratching my brain over this, family is mad a me and i suspect the dog also![:)]( "Smile")
First let me state i am not a network specialist or nothing of the kind, but for some reason Microtik came into my home and i wanted to slowly move and learn how to protect my iot devices.
But yeah.... seems i can't even go past the first challenge that is making this work as expected![:(]( "Sad")
So i kindly ask your assistance to help me figure out where is the problem and get to have the setup working as i would love it to.
My ISP provides 1Gb download and 100mbit upload.
It is a cable connection so i am forced to have a Fritzbox 6690 in front of the network.
Then i have the hEX and a switch.
ISP ---> fritzbox ----> hexs ----> lan switch
On the fritzbox i setup ip 192.168.200.1/24 and on hEX the ether1 with 192.168.200.2/24 (i think here i could use a mask for just likr 6 ips but well).
On hEX ether 3 i have the link to the lan switch and all connected devices.
All cables are cat7 on hex and fritz and cat6a on hex to switch - all links report 1Gbit.
Now....
If i plug my laptop to the fritz directly i get pretty much all speed i shoudl get (990Mbits download and 115mbit upload).
If i connect directly to the hEX i can not go past 210bit dowload and horrible like 8mbit upload.....
hEX is running on v7.14 and is pretty much the default config as i have reset is like 10000 times into a madness hoping for a different outcome.
Well and also because i also bought 2 cAP AC and struggled with capsman until i understood it but now these are disconnected and hEX is like default config.
One thing at the time.
Can you please help me understand where is my problem?
Thanks in advance
Been scratching my brain over this, family is mad a me and i suspect the dog also
First let me state i am not a network specialist or nothing of the kind, but for some reason Microtik came into my home and i wanted to slowly move and learn how to protect my iot devices.
But yeah.... seems i can't even go past the first challenge that is making this work as expected
So i kindly ask your assistance to help me figure out where is the problem and get to have the setup working as i would love it to.
My ISP provides 1Gb download and 100mbit upload.
It is a cable connection so i am forced to have a Fritzbox 6690 in front of the network.
Then i have the hEX and a switch.
ISP ---> fritzbox ----> hexs ----> lan switch
On the fritzbox i setup ip 192.168.200.1/24 and on hEX the ether1 with 192.168.200.2/24 (i think here i could use a mask for just likr 6 ips but well).
On hEX ether 3 i have the link to the lan switch and all connected devices.
All cables are cat7 on hex and fritz and cat6a on hex to switch - all links report 1Gbit.
Now....
If i plug my laptop to the fritz directly i get pretty much all speed i shoudl get (990Mbits download and 115mbit upload).
If i connect directly to the hEX i can not go past 210bit dowload and horrible like 8mbit upload.....
hEX is running on v7.14 and is pretty much the default config as i have reset is like 10000 times into a madness hoping for a different outcome.
Well and also because i also bought 2 cAP AC and struggled with capsman until i understood it but now these are disconnected and hEX is like default config.
One thing at the time.
Can you please help me understand where is my problem?
Thanks in advance
Statistics: Posted by unhuzpt — Sun Mar 10, 2024 9:02 am