I've got some devices configured with wds and mesh. The mesh seems to be perfectly stable in 6.49.10, but on 7.14, it drops constantly.
Here's the 6.49.10 config export from an SXTsq 5ac:
I can't /export the configs from 7.14 because the export times out for some reason. (It literally says "timed out" on the console when I run it).
Here's a snippet of the log from 7.14, it disconnects every 60 seconds:
I think the key hint here is:
Just for clarity: I upgraded directly from 6.49.10 to 7.14 without changing anything from the configuration above. When I downgrade to 6.49.10 - again without changing anything, the mesh works fine.
Here's the 6.49.10 config export from an SXTsq 5ac:
Code:
# mar/10/2024 01:07:08 by RouterOS 6.49.10# software id = XXX## model = RBSXTsqG-5acD# serial number = XXX/interface meshadd name=mesh1/interface wirelessset [ find default-name=wlan1 ] band=5ghz-n/ac country="united states3" disabled=no frequency=5805 mode=wds-slave radio-name=sq1 skip-dfs-channels=all ssid=mesh wds-default-bridge=mesh1 wds-mode=dynamic-mesh/interface wireless security-profilesset [ find default=yes ] authentication-types=wpa2-psk mode=dynamic-keys supplicant-identity=MikroTik/ip neighbor discovery-settingsset discover-interface-list=!dynamic/interface mesh portadd interface=wlan1 mesh=mesh1/ip addressadd address=10.28.99.253/24 interface=mesh1 network=10.28.99.0/system clockset time-zone-name=America/New_York/system identityset name=sq1/system routerboard settingsset cpu-frequency=auto/tool romonset enabled=yesHere's a snippet of the log from 7.14, it disconnects every 60 seconds:
Code:
11:32:44 wireless,info 2C:C8:1B:CF:01:D3@wlan1: connected, signal strength 3, is AP, wants WDS 11:32:44 system,info,account user admin logged out by romon E4:8D:8C:50:0A:5E via winbox 11:33:01 system,info,account user admin logged in by romon E4:8D:8C:50:0A:5E via winbox 11:33:03 system,info,account user admin logged in from 10.1.1.149 via local 11:33:44 wireless,info wlan1: 2C:C8:1B:CF:01:D3 is new WDS master 11:33:44 wireless,info 2C:C8:1B:CF:01:D3@wlan1: disconnected, no beacons received, signal strength 2 11:33:44 wireless,info wlan1 2C:C8:1B:CF:01:D3 was WDS master 11:33:47 system,info,account user admin logged out by romon E4:8D:8C:50:0A:5E via winbox 11:33:47 system,info,account user admin logged out from 10.1.1.149 via local 11:33:47 wireless,info 2C:C8:1B:CF:01:D3@wlan1: connected, signal strength 3, is AP, wants WDS 11:34:05 system,info,account user admin logged in by romon E4:8D:8C:50:0A:5E via winbox 11:34:06 system,info,account user admin logged in from 10.1.1.149 via local 11:34:47 wireless,info wlan1: 2C:C8:1B:CF:01:D3 is new WDS master 11:34:47 wireless,info 2C:C8:1B:CF:01:D3@wlan1: disconnected, no beacons received, signal strength 1 11:34:47 wireless,info wlan1 2C:C8:1B:CF:01:D3 was WDS master 11:34:50 wireless,info 00:0C:42:C3:60:C3@wlan1: connected, signal strength -35, is AP, wants WDS 11:34:50 wireless,info 2C:C8:1B:CF:01:D3@wlan1: connected, signal strength 3, is AP, wants WDS 11:34:51 system,info,account user admin logged out by romon E4:8D:8C:50:0A:5E via winbox 11:34:51 system,info,account user admin logged out from 10.1.1.149 via local 11:35:09 system,info,account user admin logged in by romon E4:8D:8C:50:0A:5E via winbox 11:35:10 system,info,account user admin logged in from 10.1.1.149 via localCode:
11:33:44 wireless,info 2C:C8:1B:CF:01:D3@wlan1: disconnected, no beacons received, signal strength 2Just for clarity: I upgraded directly from 6.49.10 to 7.14 without changing anything from the configuration above. When I downgrade to 6.49.10 - again without changing anything, the mesh works fine.
Statistics: Posted by dandrzejewski — Sun Mar 10, 2024 8:28 am