RouterBOARD hardware • CRS305 Switch/NAS/Router setup suggestion and walkthrough
Hello, I got the CRS305-1G-4S+IN, and as a networking beginner, I only use it for granted and never really understand what's going on, so I got a few questions regarding the setup. I have a wifi...
View ArticleGeneral • Re: Nstreme or Nv2
I'm posting to try and glean the optimal Nv2 performance. I've run a network for 7 years with NV2, and made various attempts to tune performance. In recent months, I've been making various network...
View ArticleWireless Networking • is version 7.13 worth to install? (about WiFi)
Hi, I've read the 7.13 has new options, does it contain also 803.11R K and V for roaming? Has been the capsman enhanced? Is it worth to install a so young version about this features? I don't want to...
View ArticleBeginner Basics • Re: Wireguard Triangle
Okay so your concern is what if the server Router is removed from the picture.The main reason why a tunnel would fail is if WAN connection was stopped or the router broke.a. If the traffic failed on...
View ArticleGeneral • Re: Only 1 tigervnc connection permitted.
Question: Where was the hEX S installed? Your network or remote?Answer: The hEX S is the router for my local home office. It isconnected to the cable modem supplied by the local cable...
View ArticleGeneral • Re: Problems with L3HW
My problem could be, that I activated l3hw switches and ports from the GUI? and not with command/interface/ethernet/switch set 0 l3-hw-offloading=yes/interface/ethernet/switch/port set [find]...
View ArticleWireless Networking • Re: 802.11ah products in the future?
I have almost forgot a step. /sRemember to save the pcb antenna from lora wap enclosure to create a battery powered HaLow-to-WiFi gateway/access pointUse big enough enclosure to fit all the components...
View ArticleWireless Networking • Re: is version 7.13 worth to install? (about WiFi)
For me (in a home environment) it was a no brainer. And I am really enjoying, because of use of the wifi-qcom-ac driver (which does make FT available and working). If you only have ac ARM devices, you...
View ArticleGeneral • Re: IPv6 configuration /64
My address ip is Code: 2001:abcd:abcd:ec00:abcd::0001.The gateway Is Code: 2001:abcd:abcd:ec00::How should I configure the subnet Mask on my address to reach the gateway? If I set Code:...
View ArticleBeginner Basics • Re: RB5009 switch ACL ports=switch1-cpu not filtering
Post your config and explain how you expect it to work. Then we'll try to find a solution.Statistics: Posted by mkx — Mon Jan 08, 2024 10:21 pm
View ArticleGeneral • Re: 7.13 wireless package split question
when an RB4011 (or any device) is upgraded from 7.12.1 to 7.13, an unusable WiFi menu is added.It's not unusable, it is required for managing ax devices via capsman.Statistics: Posted by whatever —...
View ArticleGeneral • Re: Chateau LTE12 - Cell Monitor
Your B28 has low RSRQs relative to the RSRPs, which means that it receives external interference. Raise a complain to your service provider.I don't even know where these signals are coming from! I...
View ArticleWireless Networking • Re: radar detected problems
I'm having the same problem. Mikrotik logs following message:19:37:32 wireless,info wlan1: radar detected on 5640000and disconnect every device on 5Ghz WiFi.I'm not sure if it is false positive or...
View ArticleGeneral • IPv6 bitmask in dst-address?
In order to write IPv6 rules that apply regardless of ipv6 prefix, you can do the following in OpenWRT:Code: ::1234:dead:beef:abcd/-64in ip6tables, you can specify a bitmask (to specify that the...
View ArticleScripting • Re: /ip dhcp-server lease pri det
I am considering going on fiverr to hire a programmer to write a program to import about 15 of these text files into a database.I suspect there is a more elegant way to get all the data that just...
View ArticleClik here to view.
Beginner Basics • Re: New to Mkt, struggling with basic VLAN setup
Ok, I see yours is more strict but the one I pasted seems to work too: it looks like untagged is inferred from the PVID field of this interface meaning that port 2 and 4 are shown as currently...
View ArticleGeneral • Re: how to block bridged packet routed through firewall
Sorry your requirement makes no sense. Dont care about what you want to try on the config...... illogicalWhat are the traffic requirements from the user perspective?What equipment do you have and what...
View ArticleGeneral • Re: Forwarding specific PPPoE client to Hotspot Log-in Page/Portal...
Thank you very much for answering!In Ros 6.49 do you experience conflicts when redirecting https pages?I face the challenge that when suspending a pppoe client it is redirected to a page with a...
View ArticleScripting • Why is this so hard???
I don't understand (clearly) what I'm doing wrong. I've tried a million variations. Here are 2 ways that don't work:Code: :local stringexec "/ip dhcp-server lease :foreach i in=[find] do={ :put ([get...
View ArticleScripting • Re: Why is this so hard???
You have to put extra lines between the code parts so they are displayed separate.Statistics: Posted by msatter — Tue Jan 09, 2024 12:33 am
View Article