Beginner Basics • Ping from wan
What firewall rule, nat or route are required to allow ping from wan on MT LTE18 ax?Using pretty much default config and it has a rule to allow ping but it responds only from lan network segment....
View ArticleClik here to view.
General • Re: Strange double-QOS on EOIP tunnel..?
An EOIP will go thru a smaller MTU that is entirely the point of the standard as you note but it's not a magician the only way it achieves that trick is by breaking the large packet into multiple...
View ArticleBeginner Basics • Re: Ping from wan
ROS default firewall has a "default: allow ICMP" rule (most likely 4th rule) and "default: allow ICMPv6" also one of the first rules.I suspect it's not your firewall, your device may not be accessible...
View ArticleRouterBOARD hardware • Re: hAP ax lite
Is a different case version planned, like the previous Hap lite version?We have the Hap lite TC version cheaper because users prefer the classic case. asking again: is there a plan to launch hap ax...
View ArticleGeneral • Re: High CPU useage on 4 core X86 machine
I found out why, I use KVM to run my RouterOS. When I run a speed test, the CPU will wait for NIC's interrupt. The morale of this story: never observe CPU load on hypervisor to see what processes...
View ArticleAnnouncements • Re: NEW FEATURE: Back to Home VPN
Conceptually:BTH uses wireguard = L3Zerotier operates on L2 level.So it depends on your requirements ... as usual with such questions.Cheers for thatStatistics: Posted by t0mm13b — Thu Jan 04, 2024...
View ArticleClik here to view.
General • SFTP / container mount permissions
Hello,I'm new to MikroTik and could use some help regarding SFTP / container mount permissions.I have attached a USB stick to my hAP ax³ and am using SFTP to access it. I have also mounted a folder on...
View ArticleAnnouncements • Re: v7.14beta [testing] is released!
for those how use Mikrotik on a large bgp design and use Hwl3-offload there is still instability if you add also fastpath to the mix on CCR22167.14beta3 crashed today with any log or supout after...
View ArticleVirtualization • Re: CHR image for ARM systems?
What the hex is Ampere..... MT sold with a tazer ??Assuming its like a new Cloud virtual computer or something not linux, not windows but something else VPS???https://amperecomputing.com/Is it...
View ArticleBeginner Basics • Re: Port forwarding through Proton VPN?
YES it can, just not through PROTON.You could host a CHR on VPS for example ( cloud server ) or linux OS etc.............(1) All users would go directly to the public IP of the CHR vice your public IP...
View ArticleBeginner Basics • Re: Added Mikrotik to existing network. How to...
The network comes in from the ISP via a cable modem. A main router (10.1.1.x) is connected to the modem that feeds computers, printers and a Mikrotik router (192.168.88.1) that feeds Wifi APs. I'm...
View ArticleBeginner Basics • RB5009 right choice?
Use case - home use with gaming PCs and some work from home.FTTP Internet (PPPoE VLAN) 900Mbps symmetric with 2.5gE ONT, upgrading to 2.5gE symmetric in near future.WiFi 3 x Zyxel WSM20 AX1800 OpenWrt...
View ArticleForwarding Protocols • Re: OSPF across Wireguard using ptp, not nbma?
0.0.0.0/0,::/0 Code: /interface wireguard peers add allowed-address=0.0.0.0/0,::/0 comment=vps1 endpoint-address=MY_VPS_IP endpoint-port=46715 interface=wg1 persistent-keepalive=25s...
View ArticleClik here to view.
Beginner Basics • Problem NAT Server, Client's Public IP Not Show in log
Hi guys!I have installed Ubuntu server, when NAT is configured on the router it is then directed to the Ubuntu server. All IP access records in webserver logs, SSH and all other accesses are in the...
View ArticleScripting • Trigger script on NTP Client Sync
Does anyone know of a way to trigger a small script to execute after the clock syncs with an NTP client? The script relies on an SSL certificate that isn't valid until the clock is right. So far, the...
View ArticleBeginner Basics • Re: RB5009 right choice?
My opinion is yes, you should be able to maximize your 2.5 gig throughput as its rated to approx 3gig with 25 IP filter rules.It is a new ARM64 product so the support should be good for many...
View ArticleBeginner Basics • Re: Problem NAT Server, Client's Public IP Not Show in log
This is the cause:Code: /ip firewall natchain=srcnat action=masquerade log=no log-prefix="" Everything that crosses the firewall has its source IP changed to the router's exit interface.Statistics:...
View ArticleScripting • Re: Trigger script on NTP Client Sync
Normally only a loss of power can cause a loss of time.Turn off your device [not reboot], turn it back on and check how many seconds it takes for the NTP to sync,then add (for example if it takes 30...
View ArticleBeginner Basics • Help RB3011
Hi, im a newbie in mikrotik. I have Mikrotik RB3011 and i want to use it as a load balacing for 2 ISP? Where shld i start? pls help. ThanksStatistics: Posted by ed386 — Thu Jan 04, 2024 6:29 pm
View ArticleBeginner Basics • Roadwarrior
Good evening,I have a problem with the operation of a RoadWarrior, the connection is established but I cannot reach the resources within the network, in addition to enabling chain forward traffic...
View Article