Beginner Basics • 7.14.2 Port Forwarding
Hello all,I used to have a hAP lite on 6.49.2 and upgraded to hAP ac^2 on 7.14.2.The simple port forwarding from here used to work just fine ->https://help.mikrotik.com/docs/display/ ......
View ArticleGeneral • Re: Interface List Nesting Limit?
In your snippet, there is no plain "WAN" interface list, e.g. /interface/list add name=WAN include="WAN ISP1","WAN ISP2","WAN ISP3"Statistics: Posted by Amm0 — Thu Apr 04, 2024 9:30 pm
View ArticleBeginner Basics • Virtualized VLANs (for Proxmox)
Hi everyone,after resolving this issue viewtopic.php?t=206359 just wanted to know how to setup RouterOS 7 (without external switch) in order to have the following setup:VLAN10, 192.168.10.0/24, for...
View ArticleWireless Networking • Re: no connection to CAPsMAN, managed locally
HI!I started upgrading my home network and switching to MikroTik devices. RB5009 as router - great piece of hardware. Few days ago I bought first new AP - cAP ax to test and try new configurations...
View ArticleRouterBOARD hardware • Re: Old RB750 V1 (Not RB750G) will not update to...
Yes this got resolved. 3 posts up but it's a lot of text to read though.It got I was loading the wrong firmware and assumed it was an ARM CPU when it was MIPS. Really new to RouterOS myself. What...
View ArticleBeginner Basics • Re: 7.14.2 Port Forwarding
/export file=anynameyouwish ( minus router serial number, any public WANIP information,keys )Statistics: Posted by llamajaja — Thu Apr 04, 2024 9:58 pm
View ArticleGeneral • Re: Netinstall Help: lost at final step can't select package.
I'm a little confused on routerboot itself I think that newer firmwares include an update to routerboot no? I might be wrong but I spent some time trying to find that package.Maybe I will need to do...
View ArticleBeginner Basics • Can't enable l2tp, flagged configuration, can't change...
Hello.I am trying to enable my l2tp interface but it says:Code: Couldn't change Interface <l2tp-out1> - configuration flagged, check all router configuration for unauthorized changes and update...
View ArticleWireless Networking • Re: Can't use 80+80 or 160MHz WiFi channels
Thank you all for the update! Are there any news when new devices that support 160 MHz channels or even WiFi 7 802.11be will be available?Statistics: Posted by Mikrotikki — Thu Apr 04, 2024 10:01 pm
View ArticleBeginner Basics • Re: Virtualized VLANs (for Proxmox)
Could you post a diagram of some sort because your configuration is a bit confusingStatistics: Posted by TheCat12 — Thu Apr 04, 2024 10:07 pm
View ArticleAnnouncements • Re: v6.49.14 [stable] is released!
On two separate occasions, including this one and another, I've experienced my MikroTik hAP ac3 dying after updating RouterOS and Routerboard. My usual process is to update RouterOS first, then...
View ArticleBeginner Basics • Re: Can't enable l2tp, flagged configuration, can't change...
Something has probabaly triggered the flagged state and that's why the parameter has been set again to yes. Check for any disabled configuration and review it, after which exit the flagged state with...
View ArticleBeginner Basics • Re: Slow connections across vlans with hex
if you want a noticiable performance improvement the next tier of performance is RB5009UG+S+IN, at least 3x the performance of smaller devices like hEXof course is another tier of price, but the price...
View ArticleWireless Networking • wlan1: failed to select channel
hello all, i have a ptp link between two RB912UAG-5HPnDfrom time to time the one used as bridge, stops working with these messages in log fileCode: wlan1: must select channelwlan1: failed to select...
View ArticleGeneral • 2 gws, default route issue.
I have 2 ISPs, 1st one is connecting via pppoe, default route marked. This is DAS route.2nd one has static setings, IP address, network, gw with public IP(/29 network). This is AS route, marking as...
View ArticleClik here to view.
General • Re: hAP ax³
I don't have the ax3, but I do have a Hap ax2 and Cap ax using capsman on the hap ax2 as controller.Things I don't likeOlder IOS devices still won't connect with FT enabled. 5735-5875/14=25mw Europe...
View ArticleAnnouncements • Re: v7.14.2 [stable] is released!
Well, one of the things I call buggy (and what you may call "confusing for first time users") is that the inherited values shown in winbox get written back as individually configured values when an...
View ArticleRouterBOARD hardware • Re: CubeSA 60Pro WATER DANGER
Can anyone confirm if these devices are safe to use outside at this date? It's such a weird design to have to point a device upwards to prevent water ingress. I live in Ireland and was thinking about...
View ArticleClik here to view.
General • Re: What is the best way to learn RouterOS?
By doing it.By far the best way but quite resource intensive. For me it allows me to embed things a lot faster then simply reading or class courses.But it requires a lot of time to follow this...
View ArticleScripting • Updating CA root certs regularly
Following on this old post: viewtopic.php?t=169662&sid=6818e151144b ... d9a4004745My version looks like this but generates the error every other run. I run it once, it fails (i.e. it writes the...
View Article