Beginner Basics • Re: Purchase recommendation
MIKROTIK is not the answer either, that is if you are intent on content based control.MT does not have APPLICATION CONTROLS or deep packet inspection so it may not work for you.MT is a user based and...
View ArticleBeginner Basics • Re: Separating networks
Just a coax from the isp is pluged in and 4 lans are used for home network, i want my line (lan that im using) to separte from the othersStatistics: Posted by user5677 — Wed Jan 03, 2024 4:25 pm
View ArticleUseful user articles • Re: 📌 Tool: Using Splunk to analyse MikroTik...
, and I did that using some DHCP trickery and some shell scripts. They can't go online when they try and use private mode again.This will just be a temporary solution. What if they deny? I am not sure...
View ArticleScripting • Re: Log Filter
Hi folks I hate to ask you but this seems to be the right place, have any of you for some weird reason updated to RouterOS V7.13?I did it against my better judgment and now LogFilter is broken Now I...
View ArticleGeneral • Looking for help with vrf, ntp and dns configuration
Hello,I am currently trying to switch my OpenVPN clients to WireGuard clients.The connection itself works in both directions. However, what no longer works is NTP and DNS in the CAM-LAN.The following...
View ArticleWireless Networking • Re: Ethernet backhaul not enabled
Hi, I disable Loop Prevention in the MicroTik interfaces where my 3 PX50 Deco are Pluged, and it's working now.I find this comments in the Tplink FAQ.A: Deco switching from Wi-Fi backhaul to Ethernet...
View ArticleForwarding Protocols • Re: Status of ROS V7 for BGP, MPLS, VPLS
How you got it ? I cannot pass 1gb/s . Can you please share your conf and traffic profile(avg size of packets )?Easy! 9136 MTU on backbone, traffic profile is extremely mixed and the key thing is that...
View ArticleGeneral • Static route toward a list of networks
In my main routing table I need to configure static route toward a list of networks that will be reachable over a wireguard tunnel.I created an address list, but I can not insert it in the destination...
View ArticleClik here to view.
Wireless Networking • Re: Why some caps don't want to join properly Capsman
Thanks for help,ok.. but it would much less messy if the default behaviour is to connect to specified campsman IP only, instead of broadcast/listen on all L2/L3 and, if provisioning on capsman is made...
View ArticleWireless Networking • Re: 2.4 GHz Network disappears
The config has the answer (probably):Code: /export file=anynameyoulikeRemove serial and any other private information and place in between code tags by using the </> button.Statistics: Posted by...
View ArticleRouterBOARD hardware • CRS112-8P-4S-IN max for secondary power supply
Hello,I need to buy a secondary PSU to deliver PoE to couple of devices in my home, just bought a CRS112-8P-4S-IN.( devices including couples of pis powering their own SSD through USB if possible. +...
View ArticleSwOS • Keep losing ping/connections on 3xCRS354-48P-4S+2Q+
Hi, We have installed 3 x CRS354-48P-4S+2Q+ (they are connected to a L3 Cisco Switch). What we are doing is using the CRS354-48P-4S+2Q+ for L2 for both our Data and VoIP (had cisco switch before).All...
View ArticleGeneral • Re: RB5009 USB problem
Only for the record, Sandisk is probably the (only) outsider.Most (if not all) other brands use "commonly available commercially" chips[1], and "standard" architectures/PCB's while Sandisk is known...
View ArticleBeginner Basics • Connecting Switches to RouterBoard 3011
Hello everyone!I have a (MAIN) RB3011 that is internet supplied via MK 912, that gives me (10.10.10.1) IP Address.I have 2 other systems that I want to access it when I'm connected to the (MAIN),1- IP...
View ArticleBeginner Basics • I am looking for the general recommendations for the...
Hi, I'm working on the new network configuration and would appreciate any advice (just a logic and ideas, not the code; some more specific questions are at the end of the post).Background: our office...
View ArticleRouterBOARD hardware • Re: CRS112-8P-4S-IN max for secondary power supply
You can use power adapter with higher power output (more amperes), but it won't be useful ... grand total output current is (as stated) 1.4A, add switch's own consumption.You can use adapter with...
View ArticleThe Dude • Re: label dude Service Time Down
still no solution?Statistics: Posted by dimm — Wed Jan 03, 2024 8:39 pm
View ArticleThe Dude • Re: Downtime Report by device
how did u solved it?Statistics: Posted by dimm — Wed Jan 03, 2024 8:40 pm
View ArticleWireless Networking • Re: MikroTik Metal 2SHPn there is no supply voltage
Why repair it right away, maybe it's not that bad? How does the device behave after powering on?Looks like you made the mistake of many beginners, after resetting the device can boot for several...
View ArticleGeneral • Re: Static route toward a list of networks
Correct. Each remote subnet must be a separate entry.The purpose is so that if local lan users need to reach remote subnets, the router knows where to send the local users!!The purpose is also so that...
View Article