General • Netinstall Help: lost at final step can't select package.
Please see my screenshots to go with this attempt to describe what's going on:I have followed the Instructions, networking is setup correctly and router shows up as expected. However cannot select...
View ArticleGeneral • Re: Netinstall Help: lost at final step can't select package.
You just need to select your device in "Routers/Drives" first. Then select the folder that contains your ROS main package. Select packages you want to install. Then hit Install button.see...
View ArticleBeginner Basics • 7.14.2 HAIRPIN working anywhere ?
Hii have just installed 7.14.2 onto my mikrotik router and i want to use it for internet access.As i have my mailserver at home i have some NAT what i also want to hairpin.i used the quickset on the...
View ArticleGeneral • Hotspot-Radius server not responding
Hello Dears,I tried with several topics already open on the Forum before writing here.I have a L009UiGS-RM and Hostspot & user-manager is configured on it.Everything seems to be ok only users...
View ArticleWireless Networking • Re: Can I safely uninstall wireless package - hEX
The installer doesn't analyze actual configuration of the device hence it doesn't know whether capsman functionality, included in now separate package wireless, is needed or not. To be on safe side...
View ArticleRouterOS beta • Re: feature request: ability to choose multiple VRFs in...
+1 on this requestStatistics: Posted by riv — Thu Mar 28, 2024 6:47 pm
View ArticleBeginner Basics • Re: Basic Wireguard Setup
Do you by any chance have multiple WANs?I might be way off but my plan is the same with Road Warrior VPN. I don't know much about mikrotik configs to assist you but I ran into the same issue -...
View ArticleBeginner Basics • Re: Power supply of CSS610-8G-2S+IN
Yes, they do provide redundancy. Just keep in mind that it will always use the highest voltage source. E.g. it'll keep consuming 48V PoE even with DC present if it's just 24V. This might not be...
View ArticleBeginner Basics • Re: 7.14.2 HAIRPIN working anywhere ?
(1) Change this rule in the forward chain FROMadd action=drop chain=forward comment="defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat connection-state=new...
View ArticleWireless Networking • Re: wAP ac LTE6 - LTE connectivity issues
Decided to upgrade from 6.49.11 to 7.14 with netinstall (without keeping old configuration). I did not add netwatch script (for restarting LTE interface).For now it seems that it solved this issue,...
View ArticleBeginner Basics • Re: Ethernet-connected devices keep disconnecting and...
I am experiencing this too, see attached log image.My wifi clients keep disconnecting/reconnecting under load.New L009UiGS-2HaxD using a slightly modified default config.My software is up to date I...
View ArticleWireless Networking • Re: hAP ax3 wireless problem
Everyone still having issues with ax3, can you please go into System > RouterBOARD, take note of the firmware version and post it here? If you've upgraded the firmware since you last had issues,...
View ArticleClik here to view.
Beginner Basics • Re: VLAN'ising an existing configuration without disrupting...
Also highly recommend you to watch this video with subtitles to be able to fully grasp the concept:https://youtu.be/IUu_5wODp44?si=R_qJhYhIxAYSRHvGThank you, but I neither read nor speak Ukranian...
View ArticleVirtualization • CHR License Confirmation
Hello,How can I validate that my temporary license has been updated on a CHR instance?Licensing steps were followed from: https://help.mikrotik.com/docs/display/ ... cense+keysI purchased a new P1...
View ArticleGeneral • Observing via logging
Hi there,I have many several Mikrotik routers and I'm curious how others manage or monitor them.My current plan is to run https://vector.dev/ and set each of my mikrotiks to log to it.Code:...
View ArticleGeneral • Basic VLAN configuration is not working - new driver wave 2
Code: # model = RB750r2/interface bridgeadd auto-mac=no comment=defconf name=bridge vlan-filtering=yes/interface pppoe-clientadd add-default-route=yes disabled=no interface=ether1 name=pppoe-out1...
View ArticleClik here to view.
Wireless Networking • Re: CAPsMANv2 and Wireless Backhaul with 2 Audiences
It seems that all you need to do is set wifi2 on Master Audience to 'ap bridge', and on Slave Audience to 'station bridge', with security settings and all identical on both. You will also need to...
View ArticleBeginner Basics • Re: Forum rules
It has been a bit difficult the past period but somewhere last week Normis made some changes under the hood and it effectively seems spam levels have dropped drastically. Definitely not complaining...
View ArticleClik here to view.
General • Re: Purchasing on Amazon
The most recent MT item I bought through Amazon came from Getic, one of MT’s primary distributors, possibly even #1.As always, check your sources. Statistics: Posted by tangent — Fri Mar 29, 2024 2:26...
View ArticleGeneral • Re: Precision Time Protocol (ieee 1588) CRS326-24G-2S+
That info was removed from the doc under the comment “Formatting” in the most recent update. You have to roll back to the prior version or diff them to recover the info.Statistics: Posted by tangent —...
View Article