Clik here to view.
Beginner Basics • Re: Set VLAN in eth ports
(1) This open ended nonsense sourcenat rule is from the default rules........ ??/ip firewall natadd action=masquerade chain=srcnatadd action=masquerade chain=srcnat comment="defconf: masquerade" \...
View ArticleBeginner Basics • CAPsMAN VLAN guest network - No connection
I have a problem with my guest network not working.So far, when I used my own firewall rules, everything was fine, but when it turned out that my firewall was not that tight, I replaced my own rules...
View ArticleBeginner Basics • Re: CAPsMAN VLAN guest network - No connection
Well I am not sure you handled vlans correctly, and in fact, once you start using vlans I recommend you turn the bridge affiliated subnet INTO a vlan and then your errors with the other vlans will...
View ArticleBeginner Basics • Re: Force the router to use a specific WAN
Yes but that has nothing to do with mangling or whatever.Connect ISP1s modem or modem router to ether1 for example.Then if its pppoe connection assign the parameters in the PPP menu.IF its a ISP...
View ArticleForwarding Protocols • Re: Port forwarding through Proton VPN?
NAT PMP, is nothing to do with MT.So lets get the facts.You have a third party VPN connecting your router (as a client ) to the PROTON wireguard server.Typically this is NOT for incoming originated...
View ArticleBeginner Basics • Re: Hap ax3 and cap ax poe
@mkxIsn't his another case of confusing Mikrotik PoE specs?The hap ax3 outputs passive PoE, whilst the cap ax accept as PoE in 802.3af/at, so maybe it is needed a (passive) PoE splitter powering the...
View ArticleRouterBOARD hardware • Re: I may have bricked my RB3011
So far, no success. I attempted a NetInstall of 7.10.2 but, although I'm not getting the error message any more, the router still can't be reached by Winbox or in any other way I know of.What's my...
View ArticleGeneral • Re: Model to use for site to site vpn ddns
It all depends on the load being managed by the router, service uptime, etc...As an example, HEX RB750Gr3 can handle IPsec (hardware encryption) of around 470 Mbps bandwidth. Now, I'm pretty sure that...
View ArticleUseful user articles • Re: New User Pathway To Config Success
Not sure of the genesis of your questions but correct in general, one should ensure that routing rules do not overlap mangling rules and mangling rules will take precedence. Each situation is...
View ArticleBeginner Basics • openvpn connection
Hi,I would like to set an open vpn server in my mikrotik device in my home. Mikrotik device will be connected to my modem which has a static ip address 192.168.1.1.Would it be possible to set up an...
View ArticleClik here to view.
RouterBOARD hardware • Re: CRS310-8G+2S+IN Outdoor version
More than CRS310-8G+2S+OUT I would prefer CRS310-8P+2S+IN or CRS310-8P+2S+OUT Statistics: Posted by Naecken — Mon Jan 01, 2024 8:51 pm
View ArticleForwarding Protocols • Re: IS-IS
So any news on the CPU version Ampere mikrotik will use? at leat they have more cpus, highger clock-rates.. are they trying to reach high performance now.. similar to V7 with XEON E5-2699v4 models?...
View ArticleUseful user articles • Re: Using RouterOS to VLAN your network
AMAZING!!! ThanksStatistics: Posted by pperboz — Mon Jan 01, 2024 9:04 pm
View ArticleBeginner Basics • Re: openvpn connection
It would appear you dont have a public IP directly its handled by the modem/router and not passed to your router.Can you access the ISP modem/router and forward ports to the MT router?Which MT device...
View ArticleRouterBOARD hardware • Re: x86 Mikrotik v7 performance - choosing the x86 CPU
I am using baremetal with Mellanox ConnectX-5 series. I initially tried newer Intel cards but had odd issues. Support stated that there were issues with the Intel driver so I swapped over to Mellanox...
View ArticleClik here to view.
General • Re: route marking with two ISPs and PCC with wireguard
First of all, thank you very much for taking the necessary time.(1) It is the residue of a previous configuration when changing the CAPS_MAN configuration to v7.13.The intention is/was to configure a...
View ArticleGeneral • Route Public IP Block Over l2tp
Hi You Mikrotik gurus,Im in need of some help, i have tried to seach high and low and also try myself, but have failed every time and now have reset everything.I need to Route a public IP block over...
View ArticleClik here to view.
Beginner Basics • HW-accelerated routing & firewall
Currently I have CRS326-24S+2Q+ which I would like to use for HW Accelerated Bridging at Wire Speed and use filtering and stateless inspection with connection tracking. I have upgraded it to RouterOS...
View ArticleBeginner Basics • Re: HW-accelerated routing & firewall
I think your mixing up form and function.The MT Device is a switch and you clearly stated you have an upstream firewall that takes care of firewall rules etc. so not sure what the issue is??Its a...
View ArticleBeginner Basics • Re: CAP AC: DHCP assigned DNS
Greetings I sourced a refurbished cAP ac and spent the last day resetting & reconfiguring it; major mission!I have configured the router as you suggested and while it works, the out come is the...
View Article