Beginner Basics • Unable to join SMB with windows 10
Unable to join SMB with windows 10 to disk on router Mikrotik RB750Gr3 (firmware 7.14). . All configuration from help.mikrotik.com. I can write login and after error windows error 0x80070035 or...
View ArticleScripting • Re: Xen provision/script. not enough permissions
@miku, thank you.I know that for "stored" scripts I can put some privileges, but! as you can see from my post I do not store this script, I'm passing it via xenstore.So virtual machine get and run it...
View ArticleBeginner Basics • bandwidth traffic priority methods and advice needed please
Hello all,The router is a hEX S RB760iGS r2 running OS v7.12.1. It operates very much like a pass-through router with little firewalling.Something like the waveform bufferbloat test will load cpu up...
View ArticleGeneral • Re: IPv6 taking too long for SLAAC autoconfiguration
Definitely something with the RA. I torched the interface v6only and the communication get stuck when trying to netogiate an address. As if I edit any parameter under ND (that I guess is re-launching...
View ArticleGeneral • traffic counters combined with HWL3 offloading
Hi,What we're trying to do:- track the per-VLAN traffic ingress and egress volumes.How:We utilize SNMP from another host that once a minute queries the traffic counters for all interfaces and logs...
View ArticleGeneral • Re: RB5009UPr+S+IN power problems?
Since turning down the power on the WAPS.... the rebooting stopped.After 36 hours we increased the power by 3dB. Units are still stable.Received an email from Mikrotik support this morning asking...
View ArticleClik here to view.
Beginner Basics • Vlan for Voice
HiI replaced my Gpon Huawei router with ODI Realtek DFP-34X-2C2 and its work fine by creating Vlan10 for internet with PPPoE on sfp port.am still suffering from configuration issue with Vlan30 for...
View ArticleRouterBOARD hardware • Re: Question regarding PoE vs non-PoE versions of the...
Thanks jaciaz.So, short of an official response from MikroTik staff, I think it's safe to assume that the PoE version should be just as cool and efficient as the non-PoE version when not used to power...
View ArticleBeginner Basics • Re: Unable to join SMB with windows 10
Could you post the full SMB configuration? /ip smb exportStatistics: Posted by normis — Mon Mar 04, 2024 4:23 pm
View ArticleGeneral • Re: Require help/advice with Bridge and VLAN's
Which part doesnt work the router ports or the switch ports and if its the switch, you failed to mention which router model or switch model??The router model is RB5009UG+S+(arm64) and the switch is an...
View ArticleVirtualization • Re: CHR using Apple Virtualization Framework (via UTM)
I was able to boot Ampere/ARM64 ISO on Qemu with KVM acceleration: https://github.com/ayufan-research/mikrotik-qemu-arm64. Works just fine. Tested on Raspberry PI 5 and Rock 5B.Statistics: Posted by...
View ArticleBeginner Basics • Re: Mistery autoupgrade
That setting will automatically tell the Mikrotik device to upgrade the Routerboard firmware. All you have to do is to reboot the device once the OS has been updated in order for the firmware upgrade...
View ArticleBeginner Basics • Router OS v7 Dual WAN
Hi.Dual wan, not failower, Not load balance.When disable this natCode: /ip firewall natadd action=masquerade chain=srcnatLoss internet connection in this 10.10.9.0/24, 10.10.12.0/23Code: # RouterOS...
View ArticleWireless Networking • Re: Can I do CLIENT mode WPA2 Enterprise (802.1x) PEAP?
Hi, i have the same problem but with normal TLS security not with MSCHAPv2. As you can see here i have also problem with that mikrotik not provide identity. What can be wrong?Provide link of my post...
View ArticleGeneral • VRF Bug in v7.14
Hi,After upgrading from v7.13.5 to v7.14 all tunnel interfaces (wireguard and GRE) no longer get the correct VRF assigned. The tunnel interfaces appear correctly in the VRF list, but looking at the...
View ArticleGeneral • Re: VRF Bug in v7.14
Hi,BUG reported in several threads, including in the launch thread, mikrotik support indicated that it is recognized and they will work on it.Regards,Statistics: Posted by wispmikrotik — Tue Mar 05,...
View ArticleGeneral • Re: PEAP Help - Screenshots?
It should work without radius-mac-authentication, monitor /radius monitor <0> to find out whether any packets are send to RADIUS or not, when MAC RADIUS authentication is off.When EAP...
View ArticleBeginner Basics • Re: Bridge management IP not working
Thank you for your help.I changed this lineadd address=192.168.77.250 interface=INFRA_77 network=192.168.77.250to this lineadd address=192.168.77.250/24 interface=INFRA_77 network=192.168.77.250It did...
View ArticleBeginner Basics • Re: 4 different VLAN on 1 ether port
SO I described it wrong. Here is a picture.mikrotik.pngSo how to describe the name? I know that it can be set in the network card settings, but I need to connect using WIFI, since I am connecting to a...
View ArticleWireless Networking • Re: Solving wireless coverage without possibility to...
Well, if you have a coaxial cable (think a TV antenna cable) that goes from A to B then you can use MOCA alright, but again, if you have conduits it would be better to pass a new cat 5e or 6 cable (or...
View Article