Beginner Basics • Re: how to make lr8 a wifi client
Oh, the lr8 lets you connect via lan nearly out of the box. the only thing to do is add a firewall rule for ether1 to port 80, and voila, it works. the device gets a ip address and i can connect to...
View ArticleGeneral • Masquerade with Multiple IPs
Wasn't sure about this and not in a position to test myself. Out of interest, if I have 3 different IPs on a WAN interface and I apply a src-nat, masquerade, out=WAN interface rule, would traffic just...
View ArticleWireless Networking • CAPsMAN hAP AX2 Drops
Hi all, I've been struggling to get a stable wireless network with a hAP AX2 (C52iG-5HaxD2HaxD) configured by CAPsMAN on my RB5009.During videoconferencing calls, the client device (Windows 11 laptop...
View ArticleWireless Networking • Re: CAPsMAN hAP AX2 Drops
I ran into problems with one client that wasn't able to roam (and some more strange behavour) caused by having both WPA2-PSK and WPA3-PSK.You might want to give WPA2-PSK only a try.Statistics: Posted...
View ArticleBeginner Basics • Re: Adding CRS504-4XQ-IN (bridged qsfp ports) off of...
For future reference, this turned out to be a dodgy transceiver in the CRS504. Seems under any sort of material load/heat it tanks. Switching it out for a different one makes all the things...
View ArticleGeneral • UDP faster than TCP - why?
Hi,after my issue with the 287 Mbps TCP (single stream) throughput (CCR1072) was clear to my:viewtopic.php?t=204905I testet with UDP (single stream) and it reached almost 850-900 Mbps throughput.The...
View ArticleScripting • Re: No-IP & DNSdynamic update
Amm0 Thank you it works. (But why ftp the name of this right?)Statistics: Posted by spamdog — Fri Feb 23, 2024 12:17 pm
View ArticleGeneral • Re: UDP faster than TCP - why?
That's not a Mikrotik issue...The main difference between TCP and UDP is that UDP is faster than TCP. UDP has a speed advantage because the user doesn't have to allow or acknowledge receipt of the...
View ArticleGeneral • RB5009 - problem with USB port
Hi all! Can u help me plz? On my router 5009 I accidentally deleted the usb port in system/ports.Now no usb modem works - LTE interface does not appear, but at the same time the modem is visible in...
View ArticleForwarding Protocols • ROSv7.13.3 - bgp-ext-communities
Hi All,Code: if (afi ipv4 && protocol bgp) { jump GLOBAL-DENY-v4; if (bgp-as-path ^123$) { set bgp-local-pref 200; } set bgp-communities TRANSIT; set bgp-ext-communities...
View ArticleWireless Networking • RB952Ui-5ac2nD Capsman
Hello,May I ask if is possible with firmware 7.13 manage the CAP_AX(cAPGi-5HaxD2HaxD) device from my working Capsman manager running on device (RB952Ui-5ac2nD). I distributing caps option vis dhcp....
View ArticleForwarding Protocols • Re: ROSv7.13.3 - bgp-ext-communities
Code: [admin@MikroTik] /routing/filter/community-ext-list> add list=yes communities="rt:123:123" [admin@MikroTik] /routing/filter/community-ext-list> add list=yes...
View ArticleBeginner Basics • Re: IP/Route and IP/Adresses, the "Adddress List"
Firstly, you don't need to have the LAN subnets of Router2 in the address list of Router1, you should remove them. Secondly, I don't see any 10.10.10.0 subnet that should be pingable. Thirdly, indeed...
View ArticleGeneral • MikroTik hex S + ONT Zyxel PMG3000-D20B
Hi all!I decided to replace the GPON operator terminal with my own one.I purchased a MikroTik hex S and a GPON Stick Zyxel PMG3000-D20B for it. I installed SN from the “operator” terminal on the...
View ArticleGeneral • Re: User poll about using Winbox
@normis, are there Mikrotik plans to use all these infos to change/improve Winbox and profiles ?Statistics: Posted by bajodel — Fri Feb 23, 2024 1:37 pm
View ArticleGeneral • Re: Masquerade with Multiple IPs
Masquerade does slight magic when deciding which IP address to use for SRC-NAT and gracefully handles changes. But U don't think it handles multiple IP addresses on egress interface in any particular...
View ArticleGeneral • Re: RouterOS v7 BGP4-MIB SNMP
Works, Observium now shows BGP Peering sessions, ASNs, Peer address, and session up/down and time established.Statistics: Posted by rbhylife — Fri Feb 23, 2024 6:08 pm
View ArticleClik here to view.
Beginner Basics • Re: Problem with port forwarding on L009UiGS, double NAT,...
Can you confirm the upstream router correctly port forwards traffic to port 8000 to 192.168.100.100Is something missing here ? Answering question: with both IPs in the list (external +...
View ArticleWireless Networking • Re: DFS and radar channels
There are more ways to assign frequencies:You give the format of the terminal command, and the topikstarter uses winbox. I have not been able to replicate his entry.Statistics: Posted by Ca6ko — Fri...
View ArticleClik here to view.
Beginner Basics • Re: firewall filters - solid?
Further, the Router has its own NTP server and Client which is already available so not sure what your are doing.........If you need devices to make use of the ROUTER NTP, set it up and modify the...
View Article