Wireless Networking • CAPsMAN not working on 7.13.4
Hi all,I've 2 devices, an L009UiGS-2HaxD with CAPsMAN enabled with 2 cfg for 2ghz and 5Ghz 802.11ax radios and a C53UiG+5HPaxD2HPaxD with CAP client enabled.The client connects to the capsman but no...
View ArticleWireless Networking • Re: failed to set country - CAP XL AC 7.13.4
After downgrading, it started working again. However, the interface is still under the 'Wireless' tabI installed it when I was using ROS 6.49, and the wireless connection was fine. Then, I tried to...
View ArticleBeginner Basics • CRS125-24G-1S - Internet Link
I'm a newbie to this forum so please forgive my knowledge. I have a CRS125-24G-1S, configured as a router behind a 300Mbps service. I've setup a bridge and have ether1-WAN and ether2-LAN ports with...
View ArticleBeginner Basics • Re: basic dual WAN configuration do not work
Dual wan works very well.Yes, and in latest post I explain corrections after:- upgrade from v6 to v7,- my ISP with static IP now blocks any IGMP, except I only can ping my GW, not these "1.1.1.1",...
View ArticleRouterBOARD hardware • Locked Out
I have 5 off RB3011 OS version 6.49.6 linked by OSPF, I noticed that somebody was trying to access one of the routers via it's public IP, they did not find my password.I decided to add to ip/services...
View ArticleRouterBOARD hardware • Re: Disc Lite5 ac is EOL......so what do we do?
I would not go so far as to say it undermines trust... people have to say what they want and articulate it for vendors to understand.Just to make my point clear, we wont deploy LHGs. We will deploy...
View ArticleWireless Networking • Re: wifi hardware reset issue on hap ax3
Hello dear friendsDue to a number of reports about the 'Wi-Fi hardware reset" problem to the support team and its relation with the "private address" of Apple devices, I was hoping that Mikrotik would...
View ArticleScripting • Re: Rest API Limitations (if any)
For monitoring purposes, in general, for most things, use SNMP.If there is something that's not covered by SNMP, then use the RESTful API.Statistics: Posted by DarkNate — Mon Feb 19, 2024 7:51 am
View ArticleGeneral • Re: Bonding Speed Problem
Thanks for the information..Did this answer help you?Yes .. He explained to me that I couldn't do what I wanted to do ...Statistics: Posted by LifeGame — Mon Feb 19, 2024 8:43 am
View ArticleBeginner Basics • Re: Forum rules
Just for records according to forum rules viewtopic.php?p=1057229#p1057229If you don't want to give me advice, don't write to me! Do they think I haven't read it? Statistics: Posted by BartoszP — Mon...
View ArticleBeginner Basics • Re: Basic Vlan Tag/Untag
Start with viewtopic.php?t=143620Statistics: Posted by BartoszP — Mon Feb 19, 2024 8:51 am
View ArticleGeneral • IPsec network stability problem
Hi Masters!I successfully set up a private VPN (IPsec/IKE2v) server for myself, which works normally from all platforms, except on my Mikrotik router (hAP ac2).The connection seems to be established...
View ArticleBeginner Basics • Re: Virtual SIM in Mikrotik
Not yet, but there are hints about future devices that support eSIM.Note this is not virtual, but still a chip soldered on the board or available in SOC.Statistics: Posted by eworm — Mon Feb 19, 2024...
View ArticleBeginner Basics • Re: Port forwarding
Start with viewtopic.php?t=203686Statistics: Posted by BartoszP — Mon Feb 19, 2024 8:54 am
View ArticleGeneral • Script needed - IPv6 address invalid from IPv6 DHCP pool
Hi AllWe noticed the same problem in article viewtopic.php?t=151637I do have a solution but struggling to setup a script to automate the restoration.Problem : IPv6 address not getting IP from pool...
View ArticleGeneral • Re: Wireguard breaking changes in 7.12
No, I did not contact support about it.You are correct, we upgraded one of our routers that had a previously working Wireguard tunnel and that seems to work assuming you don't change anything. But to...
View ArticleGeneral • Re: Script needed - IPv6 address invalid from IPv6 DHCP pool
Here is also an export of our IPv6 configCode: /ipv6 dhcp-serveradd address-pool=ipv6-pool interface=bridge1 name=ipv6-dhcp/ipv6 addressadd address=::1 from-pool=ipv6-pool interface=bridge1/ipv6...
View ArticleRouterBOARD hardware • Re: Locked Out
Where is this 192.168.121.0/24 range actually used then ? On 1 of these remote sites ?Just get a working-PC on that range, teamviewer/RDP into it and from there Winbox/WebFig to your RouterOS boxes...
View ArticleRouterBOARD hardware • Re: hAP ax lite LTE - issues after modem FW upgrade to...
Another workaround I have tested is to set the Netwatch monitor to some IP for example 8.8.8.8 and if ping failed set the script to disable/enable the lte1 interface.Statistics: Posted by ilkogd — Mon...
View ArticleWireless Networking • Re: CAPsMAN not working on 7.13.4
Have you tried clearing out all certificates ?Statistics: Posted by holvoetn — Mon Feb 19, 2024 9:39 am
View Article