General • WinBox MAC connection closes after 5 seconds
WinBox connecting via MAC address disconnects after 5 seconds. Connecting by IP works fine. This is on default router configuration and Windows10 PC connected directly to Eth2. WinBox 3.40 (newest)...
View ArticleGeneral • Re: Dual WAN parallel setup for only one subnet?
It would seem what you need conceptually is.add check-gateway=ping distance=2 dst-address=0.0.0.0/0 gateway=ISP1 routing-table=mainadd distance=4 dst-address=0.0.0.0/0 gateway=ISP2...
View ArticleClik here to view.
Beginner Basics • Mikrotik terrible 2.4 ghz performance + interference issues
Hello hello everyone Seems like there were tons of topics like this but as every case is different, logs are required etc and after two weeks of trying I decided to start a new one. Sooo... I have a...
View ArticleBeginner Basics • Re: Subnet Public IP's issue
Mikrotik do not support RFC3021 /31 addressing, use /32 for the local and gateway addresses:/ip addressadd address=88.xx.xx.15 interface=vlan835 network=88.xx.xx.14If the subnet public IP is routed to...
View ArticleBeginner Basics • Re: RB5009 not getting DynamicIP from Comcast Cable MODEM
@Axo123, test if DHCP is working properly by running WinBox "Tools -> Packet Sniffer" on the WAN interface. When the router sends out a DHCPREQUEST, you should receive a DHCPOFFER with an IP...
View ArticleGeneral • Re: Wireguard from Linux not working
@larsa, I understand my description is not complete! Let me say in other words:-I used WireShark on Linux and I see the "Handshake Initiation" transmission.-I used Packet Sniffer on Mikrotik and I see...
View ArticleBeginner Basics • Re: check my settings
Okay to be clear a beginner does not come up with these firewall rules............Where did you get them from??........Code: /ip firewall filteradd action=passthrough chain=comment-test comment=\ "--...
View ArticleRouterBOARD hardware • L11UG-5HaxD and 160mhz?
acording to spec it supports 2400mbit/s over 2x2 802.11ax modulation.Does it mean that it supports 160mhz wide channels?Statistics: Posted by marcin21 — Tue Feb 13, 2024 12:45 am
View ArticleContainers • Re: The complete SSDP + mDNS solution for network segmentation
Add veth1-reflector as tagged port to the vlans you want to use.Change the bridge to your bridge and vlan-ids to the vlans you want to use.Please note, these commands open an editor, to save the...
View ArticleGeneral • Re: IPsec and certificates
Just quickly answering my own question on the very off chance anyone else has a similar problem and stumbles over this post. RouterOS doesn't send the certificate chain automatically, it has to be...
View ArticleThe User Manager • Re: User-manager V7 - Hotspot
Hello there,First, could you please share your configuration (you could hide sensitive things before share publicly), so the other member can see what's going on to your situation.Regards.Statistics:...
View ArticleGeneral • app for end user on ios
any app for end user on ios simple ???like unifi appStatistics: Posted by mohndtiser — Tue Feb 13, 2024 1:44 am
View ArticleGeneral • Re: app for end user on ios
Hello there,Did you mean WinBox or MikroTik app on iOS? Have you try searching for that on AppStore, since I'm not iOS user.Regards.Statistics: Posted by defconfonly — Tue Feb 13, 2024 1:49 am
View ArticleBeginner Basics • Re: Tilde sign in Terminal (Mac)
On Mac, if you enable "Show input menu in menu bar" option in System Preferences — in Keyboard section, there is the "Text Input" section, and button for "Edit...". Then in the task bar, another icon...
View ArticleWireless Networking • Re: Capsman version
So capsman version is same with package version?Statistics: Posted by handiansudianto — Tue Feb 13, 2024 3:33 am
View ArticleGeneral • Mikrotik V7.13 unstable on CCR2116
Hey guysI have a CCR2116-12G-4S, this is a core router working mostly as WAN aggregator implementing BGP IPv4 and IPv6 full routes. Since day zero I noticed a estrange behavior with this router, once...
View ArticleGeneral • Re: How to do a Burst alongside with PCQ configured on Simple Queues?
Is there anyone can help me about this? any suggestions or opinion are really appreciated.Statistics: Posted by defconfonly — Tue Feb 13, 2024 3:59 am
View ArticleClik here to view.
General • wireless works great but ethernet won't get to some sites
I have a router that when connected via ethernet, i can not connect some sites like a health insurance site or AOL but when i disconnect ethernet port and connect to the same router via WiFi, i can...
View ArticleGeneral • Re: wireless works great but ethernet won't get to some sites
Hello there,I've tried accessing the site that you have attach on the image and got the same issue as yours with or without the ethernet/wireless connectivity, isn't it possible due to their website...
View ArticleClik here to view.
Beginner Basics • Re: RB5009 not getting DynamicIP from Comcast Cable MODEM...
Hi Larsa + Gabacho4, thanks for taking your time to help. Haha, guess the packet sniffer may be too advanced for me right now, but since I am keep the RB5009 given it now connects to the Internet, I...
View Article