Hello anav, thank you for your tips. I have cleaned up my configs as per your suggestions.
I have managed to get some time to spend with the router and switch config. I am able, for now, to ping 192.168.225.1 and .3 from router switch and vise versa. The client (192.168.225.29) can also ping gateway and the switch.
So.. I have opted to go with a Bridge1 configuration - VLAN2225 on the RB5009. I have "attempted" to configure another DHCP Server on Bridge1. Part way through the configuration, it complains that "DHCP Server with such interface already exists".. Out of curiosity I tried on "bridge", I get the same pop up error, as the .88 network lives there.. Right, or wrong, I was under the impression of the following:
Create a new bridge (call it what you want). Add your VLAN(s) there. I am attempting to do router on a stick. Could be around 4 VLAN's. What exactly am I missing here? Am I supposed to create a bridge per VLAN? I have also read don't create multiple bridges.. Clearly I have not grasped the whole concept of this platform..
Other things that do not make sense to me. Why can I not remove an interface off of "Bridge" (ether3 on the RB5009) and add to "Bridge1" to VLAN2225. It just doesn't work.. No Ip address at all is served to the client.
EDIT: Another thing i ma not sure of. It seems that the only way I can stay connected to the CRS10, is if I have an ethernet cable plugged between the RB5009 and CRS10. How do i resolve that? I thought that since both devices can ping each other on the 2225 network, that It would be able to stay connect through winbox..
I have managed to get some time to spend with the router and switch config. I am able, for now, to ping 192.168.225.1 and .3 from router switch and vise versa. The client (192.168.225.29) can also ping gateway and the switch.
So.. I have opted to go with a Bridge1 configuration - VLAN2225 on the RB5009. I have "attempted" to configure another DHCP Server on Bridge1. Part way through the configuration, it complains that "DHCP Server with such interface already exists".. Out of curiosity I tried on "bridge", I get the same pop up error, as the .88 network lives there.. Right, or wrong, I was under the impression of the following:
Create a new bridge (call it what you want). Add your VLAN(s) there. I am attempting to do router on a stick. Could be around 4 VLAN's. What exactly am I missing here? Am I supposed to create a bridge per VLAN? I have also read don't create multiple bridges.. Clearly I have not grasped the whole concept of this platform..
Other things that do not make sense to me. Why can I not remove an interface off of "Bridge" (ether3 on the RB5009) and add to "Bridge1" to VLAN2225. It just doesn't work.. No Ip address at all is served to the client.
EDIT: Another thing i ma not sure of. It seems that the only way I can stay connected to the CRS10, is if I have an ethernet cable plugged between the RB5009 and CRS10. How do i resolve that? I thought that since both devices can ping each other on the 2225 network, that It would be able to stay connect through winbox..
Statistics: Posted by wcj2023 — Fri Jan 19, 2024 8:18 pm