Hi
After the upgrade to ROS 7.13 i always get the "no space to extract layer" during the container extraction.
This has worked before.
I have noticed this because after the upgrade to RouterOS 7.13 i also wanted to upgrade my PiHole container.
Everything works as expected up until the extraction. Then i get the "no space to extract layer" error.
As far as I can see (if I leave the files window open in Winbox) is that RouterOS attempts to unzip it to the local storage and not to the USB drive.
Any ideas please?
Is this a known issue in 7.13? I do not really want to downgrade.
Disk config:Container config:
After the upgrade to ROS 7.13 i always get the "no space to extract layer" during the container extraction.
This has worked before.
I have noticed this because after the upgrade to RouterOS 7.13 i also wanted to upgrade my PiHole container.
Everything works as expected up until the extraction. Then i get the "no space to extract layer" error.
As far as I can see (if I leave the files window open in Winbox) is that RouterOS attempts to unzip it to the local storage and not to the USB drive.
Any ideas please?
Is this a known issue in 7.13? I do not really want to downgrade.
Disk config:
Code:
disk printFlags: B - BLOCK-DEVICE; M - MOUNTED; p - PARTITIONColumns: SLOT, MODEL, SERIAL, INTERFACE, SIZE, FREE, FS# SLOT MODEL SERIAL INTERFACE SIZE FREE FS 0 B usb1 SanDisk SanDisk 3.2 Gen1 A2003852CB065A46 USB 3.20 5000Mbps 125 162 225 664 1 BMp usb1-part1 @512-125'162'225'664 125 162 225 152 124 108 500 992 ext4Code:
/container mountsadd dst=/etc/pihole name=etc_pihole src=/usb1-part1/etcadd dst=/etc/dnsmasq.d name=dnsmasq_pihole src=/usb1-part1/etc-dnsmasq.d/container configset ram-high=200.0MiB registry-url=https://registry.hub.docker.com/v2/ tmpdir=usb1-part1/pull/container envsadd key=TZ name=pihole value=Europe/Bucharestadd key=WEBPASSWORD name=pihole value=passwordadd key=DNSMASQ_USER name=pihole value=rootStatistics: Posted by bogdano — Tue Dec 26, 2023 10:00 pm