Hello everyone and happy new year
I'm really starting to have a lot of problems with poor mobile connections that I run the VPN on. The big problem is when the connection comes again does my VPN get a 0.0.0.0 ip? Now I have lived with logging on to my VPN server/router for over 6 months and under ppp > active connections I just click on the VPNs that have been given ip redresse 0.0.0.0 and then on remove. It's bad call ip, it's open only the ips you have put in pool and in profile where I have specified both local and remote ip which oddly enough a lot of times get 0.0.0.0. It is only all the clients who have sim cards on them that are the problem, the fixed lines work fine. All products are mikrotik and they are set up as standard L2TP where I then use local and remote ip to create an EOIP tunnel with, completely standard as all the guides say on mikrotik.
Is there a way to create a script that runs once every 15 min via seheduler which measures whether a PPP active connections has been given an ip 0.0.0.0 if so should it remove it?
I have already set up a script that pings 8.8.8.8 every hour and if there is no ping it resets the LTE connection, I need that because there are really challenges at small 30 locations that run over a mobile connection, and that part works fine enough , otherwise if I omitted this, they would just be active without internet on.
Hope someone can help.
Regards
Jimmy
I'm really starting to have a lot of problems with poor mobile connections that I run the VPN on. The big problem is when the connection comes again does my VPN get a 0.0.0.0 ip? Now I have lived with logging on to my VPN server/router for over 6 months and under ppp > active connections I just click on the VPNs that have been given ip redresse 0.0.0.0 and then on remove. It's bad call ip, it's open only the ips you have put in pool and in profile where I have specified both local and remote ip which oddly enough a lot of times get 0.0.0.0. It is only all the clients who have sim cards on them that are the problem, the fixed lines work fine. All products are mikrotik and they are set up as standard L2TP where I then use local and remote ip to create an EOIP tunnel with, completely standard as all the guides say on mikrotik.
Is there a way to create a script that runs once every 15 min via seheduler which measures whether a PPP active connections has been given an ip 0.0.0.0 if so should it remove it?
I have already set up a script that pings 8.8.8.8 every hour and if there is no ping it resets the LTE connection, I need that because there are really challenges at small 30 locations that run over a mobile connection, and that part works fine enough , otherwise if I omitted this, they would just be active without internet on.
Hope someone can help.
Regards
Jimmy
Statistics: Posted by Jimmy — Sun Jan 14, 2024 9:51 pm