Hi,
I have a setup with 3 hap AX²: one as router and two as CAP. I can see all three devices in winbox but the two CAP's are not reachable (not via winbox, nor via accessing their IP's). I have set a static IP for both (192.168.60.250 and 192.168.60.251). What am I doing wrong? Please find my config below:
I have a setup with 3 hap AX²: one as router and two as CAP. I can see all three devices in winbox but the two CAP's are not reachable (not via winbox, nor via accessing their IP's). I have set a static IP for both (192.168.60.250 and 192.168.60.251). What am I doing wrong? Please find my config below:
Code:
# 2023-12-26 18:07:04 by RouterOS 7.13# software id = 7Z28-IETK## model = C52iG-5HaxD2HaxD# serial number = HEP099KCHF8/interface bridgeadd comment=WAN name=br_WAN_ISP port-cost-mode=shortadd comment=WAN name=br_WAN_LTE port-cost-mode=shortadd comment="Guest network" ingress-filtering=no name=br_guest \ port-cost-mode=short vlan-filtering=yesadd comment="LAN network" ingress-filtering=no name=br_lan port-cost-mode=\ short vlan-filtering=yesadd comment=OOB name=br_local port-cost-mode=short/interface wireguardadd comment=back-to-home-vpn listen-port=43955 mtu=1420 name=back-to-home-vpn/interface vlanadd interface=ether1 name=ether1_vl_GUEST vlan-id=70add interface=ether1 name=ether1_vl_LAN vlan-id=60add interface=ether1 name=ether1_vl_WAN_LTE vlan-id=50add interface=ether3 name=ether3_vl_GUEST vlan-id=70add interface=ether3 name=ether3_vl_LAN vlan-id=60add interface=ether4 name=ether4_vl_GUEST vlan-id=70add interface=ether4 name=ether4_vl_LAN vlan-id=60add interface=ether5 name=ether5_vl_local vlan-id=70add interface=br_guest name="vl_GUEST on br_GUEST" vlan-id=70add interface=br_lan name="vl_LAN on br_LAN" vlan-id=60/interface listadd name=LEASESadd name=UNTRUSTEDadd name=WANadd name=LAN/interface wifi channeladd band=2ghz-ax disabled=no name=ch_2.4Ghz width=20mhzadd band=5ghz-ax disabled=no name=ch_5Ghz width=20/40/80mhz/interface wifi datapathadd bridge=br_lan disabled=no interface-list=LAN name="br_LAN - VLAN 60" \ vlan-id=60add bridge=br_guest disabled=no name="br_GUEST - VLAN 70" vlan-id=70/interface wifi securityadd authentication-types=wpa2-psk connect-priority=0 disabled=no name=\ seccfg_Cussangyadd authentication-types=wpa2-psk connect-priority=0 disabled=no name=\ seccfg_Cussangy_guest/interface wifi configurationadd channel=ch_2.4Ghz country=France disabled=no mode=ap name=\ cfg_Cussangy_2.4Ghz security=seccfg_Cussangy security.connect-priority=0 \ ssid=Cussangyadd channel=ch_5Ghz country=France datapath="br_LAN - VLAN 60" disabled=no \ mode=ap name=cfg_Cussangy_5Ghz security=seccfg_Cussangy \ security.connect-priority=0 ssid=Cussangyadd channel=ch_2.4Ghz country=France datapath="br_GUEST - VLAN 70" disabled=\ no mode=ap name=cfg_Cussangy_guest_2.4Ghz security=seccfg_Cussangy_guest \ security.connect-priority=0 ssid=Cussangy_guestadd channel=ch_5Ghz country=France datapath="br_GUEST - VLAN 70" disabled=no \ mode=ap name=cfg_Cussangy_guest_5Ghz security=seccfg_Cussangy_guest \ security.connect-priority=0 ssid=Cussangy_guestadd comment=test country=France disabled=yes mode=ap name=cfg24Cussangy \ security=seccfg_Cussangy security.connect-priority=0 ssid=Cussangyadd comment=test country=France datapath="br_LAN - VLAN 60" disabled=yes \ mode=ap name=cfg5Cussangy security=seccfg_Cussangy \ security.connect-priority=0 ssid=Cussangy/interface wifiset [ find default-name=wifi2 ] configuration=cfg_Cussangy_2.4Ghz \ configuration.mode=ap datapath.bridge=br_lan disabled=no name=\ Router_Cussangy_2.4Ghz security=seccfg_Cussangy \ security.connect-priority=0set [ find default-name=wifi1 ] configuration=cfg_Cussangy_5Ghz \ configuration.mode=ap datapath.bridge=br_lan disabled=no name=\ Router_Cussangy_5Ghz security=seccfg_Cussangy security.connect-priority=0add configuration=cfg_Cussangy_guest_2.4Ghz configuration.mode=ap \ datapath.bridge=br_guest disabled=no mac-address=7A:9A:18:01:AE:31 \ master-interface=Router_Cussangy_2.4Ghz name=Router_Cussangy_guest_2.4Ghz \ security=seccfg_Cussangy_guest security.connect-priority=0add configuration=cfg_Cussangy_guest_5Ghz configuration.mode=ap \ datapath.bridge=br_guest disabled=no mac-address=7A:9A:18:01:AE:2F \ master-interface=Router_Cussangy_5Ghz name=Router_Cussangy_guest_5Ghz \ security=seccfg_Cussangy_guest security.connect-priority=0/ip ipsec profileadd dh-group=modp2048 enc-algorithm=aes-256 hash-algorithm=sha512 name=\ profile1 proposal-check=strict/ip ipsec peeradd address=bpnet.duckdns.org exchange-mode=ike2 name=bpnet profile=profile1/ip ipsec proposaladd auth-algorithms="" enc-algorithms=aes-128-gcm lifetime=1h name=proposal1 \ pfs-group=modp2048/ip pooladd name=dhcp_local ranges=192.168.77.10-192.168.77.250add name=dhcp_lan ranges=192.168.60.10-192.168.60.250add name=dhcp_guest ranges=192.168.70.10-192.168.70.250/ip dhcp-serveradd address-pool=dhcp_local interface=br_local lease-time=1h name=dhcp_localadd address-pool=dhcp_lan interface=br_lan lease-time=1d name=dhcp_lanadd address-pool=dhcp_guest interface=br_guest name=dhcp_guest/user groupadd name=homeassistant policy="read,test,api,!local,!telnet,!ssh,!ftp,!reboot,\ !write,!policy,!winbox,!password,!web,!sniff,!sensitive,!romon,!rest-api"/interface bridge portadd bridge=br_WAN_ISP disabled=yes interface=ether2 internal-path-cost=10 \ path-cost=10add bridge=br_WAN_LTE interface=ether1_vl_WAN_LTE internal-path-cost=10 \ path-cost=10add bridge=br_lan interface=ether3_vl_LAN internal-path-cost=10 path-cost=10add bridge=br_lan interface=ether4_vl_LAN internal-path-cost=10 path-cost=10add bridge=br_local interface=ether5_vl_local internal-path-cost=10 \ path-cost=10add bridge=br_guest interface=ether3_vl_GUEST internal-path-cost=10 \ path-cost=10add bridge=br_guest interface=ether4_vl_GUEST internal-path-cost=10 \ path-cost=10add bridge=br_local disabled=yes interface=ether5 internal-path-cost=10 \Statistics: Posted by Willi — Tue Dec 26, 2023 7:15 pm