First of all happy new year to all!
I am having some trouble with switching from hAP lite to L009UiGS and was hoping I could get some help with my issue.
I have created them by following this very nice guide viewtopic.php?t=143620 from the forums and modified it to fit my needs.
My network is separated in 6 VLANs:
Vlan10 - 10.0.10.0/24 - (Serverji) - Vlan for servers and self hosted services
Vlan11 - 10.0.11.0/24 - (Lan) - Main LAN for my client devices
Vlan12 - 192.168.2.0/24 - (Kamere) - IP camera network (no access to other VLANs and WAN)
Vlan13 - 10.0.13.0/24 - (Gost) - Lan for guest clients (not curently in use/not fully configured)
Vlan14 - 10.0.14.0/24 - (IoT) - Lan for IoT devices
Firewall rules are not fully configured yes, but that's not what I would like help with. I am stuck at WiFi6 configuration. I have installed the wifi-qcom package and can manage wifi6, but I cannot get capsman to work for local device. Currently I only have a cAP 2.4G and mAP lite for testing the wifi, but as far as I know that these cannot be managed on the L009 if I also want the new WiFi6 capsman.
I have created 3 configurations for capsman and when I try to assign two of them to the local wifi1 (cfg-IoT as main and cfg-Lan as slave) I see a new virtual wlan2 interface created, GUI says that both are manged by capsman, but I cannot see the SSIDs on *any* client (I have checked that my clients support WiFi6, I have even tried to lock the channels to 2.4GHz G and N and it still doesn't show them)
I've been stuck on this issue for a few days and would like to ask for help.
(Attached is my L009 config)
Many thanks in advanced!
I am having some trouble with switching from hAP lite to L009UiGS and was hoping I could get some help with my issue.
I have created them by following this very nice guide viewtopic.php?t=143620 from the forums and modified it to fit my needs.
My network is separated in 6 VLANs:
Vlan10 - 10.0.10.0/24 - (Serverji) - Vlan for servers and self hosted services
Vlan11 - 10.0.11.0/24 - (Lan) - Main LAN for my client devices
Vlan12 - 192.168.2.0/24 - (Kamere) - IP camera network (no access to other VLANs and WAN)
Vlan13 - 10.0.13.0/24 - (Gost) - Lan for guest clients (not curently in use/not fully configured)
Vlan14 - 10.0.14.0/24 - (IoT) - Lan for IoT devices
Firewall rules are not fully configured yes, but that's not what I would like help with. I am stuck at WiFi6 configuration. I have installed the wifi-qcom package and can manage wifi6, but I cannot get capsman to work for local device. Currently I only have a cAP 2.4G and mAP lite for testing the wifi, but as far as I know that these cannot be managed on the L009 if I also want the new WiFi6 capsman.
I have created 3 configurations for capsman and when I try to assign two of them to the local wifi1 (cfg-IoT as main and cfg-Lan as slave) I see a new virtual wlan2 interface created, GUI says that both are manged by capsman, but I cannot see the SSIDs on *any* client (I have checked that my clients support WiFi6, I have even tried to lock the channels to 2.4GHz G and N and it still doesn't show them)
I've been stuck on this issue for a few days and would like to ask for help.
(Attached is my L009 config)
Many thanks in advanced!
Statistics: Posted by černobog — Thu Jan 04, 2024 7:34 pm