When using VLAN's, you can't use datapath (yet) on AC devices. Hopefully this will be resolved in newer versions of RouterOS, up till then you can use this "hack":
https://help.mikrotik.com/docs/display/ ... ionexample:
The "hack" is using VLAN filtering (manually) on the CAP.
In regards to steering (assuming you are not referring to roaming?), I prefer to set the 2.4GHz radio transmission power as low as possible (to have good signal). All clients are on the 5GHz radios.
On the above link you can find a lot of recommendations, also in regards to fast roaming.
https://help.mikrotik.com/docs/display/ ... ionexample:
The "hack" is using VLAN filtering (manually) on the CAP.
In regards to steering (assuming you are not referring to roaming?), I prefer to set the 2.4GHz radio transmission power as low as possible (to have good signal). All clients are on the 5GHz radios.
On the above link you can find a lot of recommendations, also in regards to fast roaming.
Statistics: Posted by erlinden — Tue Jan 02, 2024 9:06 pm
