General • Re: MultiWAN + LAN through vlans

Just to be clear the RB4001 r2 is acting as a router and has its own SUbnets with DHCP.

Your router settings for the ISPs make no sense to me. Why are you using vlans?
Why is there only one IP DHCP client when you said all three get assigned that way.
why is your single IP DHCP client have v100 mgmt.............

Nothing makes sense at the moment, are you sure you get dynamic IPs from all three ISPs for example
What type of connection are they ( LTE, Starlink etc...)

Looking bridge ports, why is ether1,ether2 there but not ether3.

As I said, there is no logic so I cannot progress.

Why is vlan 11,12,13 going to the RB4011.............. ??

How does 140 popup when not created at either router ????
Which port does v101 go out on the first router....another missing diagram item
I am assuming vlan150 is coming from the RB4011 and the associated device is connected to the R1 port ether5

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

My conclusion thus far is you have two routers when you should only be using one router.

Statistics: Posted by anav — Tue Mar 19, 2024 1:38 pm

---