Dear all,
Coming from a non Mikrotik environment before, i would really appreciate some help with our current set-up.
We want to use our brand new MT as a router only device, with multiple Firewalls behind it.
We have a /29 subnet from our provider connection is made with PPPoE
On our previous Cisco router, the router itself connect with PPPoE and had the first ip in the subnet, let say we use; 10.10.10.9/29
We then configure the FW's behind with one (or more) of the remaining ip-addresses (static), thus FW1 has 10.10.10.10 and 2 has 10.10.10.11
How to do this one a Mikrotik?
At this moment id o have it connected, with internet access, but now we are stuck on how to continue.
Coming from a non Mikrotik environment before, i would really appreciate some help with our current set-up.
We want to use our brand new MT as a router only device, with multiple Firewalls behind it.
We have a /29 subnet from our provider connection is made with PPPoE
On our previous Cisco router, the router itself connect with PPPoE and had the first ip in the subnet, let say we use; 10.10.10.9/29
We then configure the FW's behind with one (or more) of the remaining ip-addresses (static), thus FW1 has 10.10.10.10 and 2 has 10.10.10.11
How to do this one a Mikrotik?
At this moment id o have it connected, with internet access, but now we are stuck on how to continue.
Statistics: Posted by jopelepoop — Thu Mar 07, 2024 12:41 pm