Hi Halz,
I think I found my error. I used (and hoped) for a ::/56 prefix, BUT I should have known from former tests with my opnsense firewall, that 1und1 just gives you a /64.
If you just use a ::/64 prefix request, then disable your pppoe, (important) delete all ipv6 from the former pool in the /ipv6/addresses, then re-enable the pppoe..... it should work.
It played with it a bit, and everytime I tried with a ::/56 my DS-Lite tunnel stopped to work. MY problem seem to have been in this area.
I think in your screenshot the blue line is strange. The line above is what I would expect, especially knowing the aftr.online.versatel.de address is the destination address in the line above the blue.
I think I found my error. I used (and hoped) for a ::/56 prefix, BUT I should have known from former tests with my opnsense firewall, that 1und1 just gives you a /64.
If you just use a ::/64 prefix request, then disable your pppoe, (important) delete all ipv6 from the former pool in the /ipv6/addresses, then re-enable the pppoe..... it should work.
It played with it a bit, and everytime I tried with a ::/56 my DS-Lite tunnel stopped to work. MY problem seem to have been in this area.
I think in your screenshot the blue line is strange. The line above is what I would expect, especially knowing the aftr.online.versatel.de address is the destination address in the line above the blue.
Statistics: Posted by Fanes — Wed Mar 06, 2024 12:48 pm