General • Vlan configuration and problems crs326 routerOS 7.13

crs326 vlans don't seem to work in routerOS version 7.13 routerOS 7.9 they work, has any setting changed between those software versions. Ping no
so it goes, both in the internal network and to the external network, as if the speed of the port were 0, could rstp be the cause of the problem, because there are two switches in the network where it is activated, I tried to turn it off in the bridge's protocol-mode none,
and this had no effect. Here are the switch configurations

/interface/bridge of the main switch
configuration, this is where vlans work
https://pastebin.com/6qmJar8E

A switch where vlans don't work /interface/bridge configuration
https://pastebin.com/aaRrxjAQ

A working switchport configuration
https://pastebin.com/fBMvAtp2

Port configuration from a switch with vlans do not work
https://pastebin.com/PxLWXRjs

Main switch where vlans work in /interface/bridge/monitor
https://pastebin.com/gdnL6YdQ
Switch where vlans don't work /interface/bridge/monitor
https://pastebin.com/PhCwiZBP

I would think the problem is somewhere in the bridge settings or
in the spanning tree protocol settings, I would be very grateful if someone could tell me the answer to the problem, this problem has been bothering my network for quite some time.

Statistics: Posted by Dataaja95 — Tue Mar 05, 2024 12:05 pm

---