Commonly the MTU for pppoe is 1492,
Some ISP's do seem to require 1480 though.
If you have any max-mru, max-mtu set in your pppoe client
you could remove the settings, see if anything changes.
You could also try setting them to 1492 (or even 1500, though this is very unlikely to work)
See what the maximum usable MTU you can have is.
Another (low) possibility is to play with the mrru setting,
Maybe they allow multilink to let full 1500 byte packets through.
Some ISP's do seem to require 1480 though.
If you have any max-mru, max-mtu set in your pppoe client
you could remove the settings, see if anything changes.
You could also try setting them to 1492 (or even 1500, though this is very unlikely to work)
See what the maximum usable MTU you can have is.
Another (low) possibility is to play with the mrru setting,
Maybe they allow multilink to let full 1500 byte packets through.
Statistics: Posted by rplant — Thu Feb 29, 2024 12:05 am