I tried to upload everything that should be necessary to flash the modem here:
https://1drv.ms/f/s!AmHD_RlSyqfbj40ag_0 ... Q?e=whHfzA
Brief instructions:
1. Plug the modem to a PC
2. Find the respective hidden disk drive that was assigned to the modem - you can find it either in the safe disconnect tool:
![Image]()
or in the Computer Management console - compmgmt.msc under disk management
3. Once you find the disk drive letter, start the TCL-SWITCH-TOOL, enter the drive letter and press Switch Debug.
4. The modem should switch to ADB mode and must be visible in the Windows Device Manager
5. The tricky part is to install working drivers for the ADB interface of the modem. I've included some drivers in the folder, but if you're using Windows 11 it might be necessary to disable Windows Core isolation from Settings - Device Security. I can't actually try because I don't have a modem with me.
6. After the drivers are installed start the Firmware_IK41_01011_fastboot_install.bat - the script will lead you through the flash process.
https://1drv.ms/f/s!AmHD_RlSyqfbj40ag_0 ... Q?e=whHfzA
Brief instructions:
1. Plug the modem to a PC
2. Find the respective hidden disk drive that was assigned to the modem - you can find it either in the safe disconnect tool:
or in the Computer Management console - compmgmt.msc under disk management
3. Once you find the disk drive letter, start the TCL-SWITCH-TOOL, enter the drive letter and press Switch Debug.
4. The modem should switch to ADB mode and must be visible in the Windows Device Manager
5. The tricky part is to install working drivers for the ADB interface of the modem. I've included some drivers in the folder, but if you're using Windows 11 it might be necessary to disable Windows Core isolation from Settings - Device Security. I can't actually try because I don't have a modem with me.
6. After the drivers are installed start the Firmware_IK41_01011_fastboot_install.bat - the script will lead you through the flash process.
Statistics: Posted by 3dfx — Sat Feb 24, 2024 9:55 am