Hi,
I am sitting in front of a CCR1072 (1000MHz clocked), running on ROS 6.49.13 which is used a company edge-router. With around 120 firewall-rules (in different chains), 50 NAT-rules, 130 Mangle-rules, 220 routes, 200 Simple-Queues and 1 Bridge with 40 VLANs. But I would say one third of everything is disabled (until needed).
This device is able to push routed (VLANx to VLANy) around 280-300Mbit/sec through a TCP-single-stream connection. Tested with different performance-tools, everytime same results. Because I have no reference, is this an acceptable value for such a configuration and device? This table: https://mikrotik.com/product/CCR1072-1G ... estresults is not very helpful, because it shows with 512byte and 25 IP-Firewall-Filter rules, its able to do 20691 Mbps. But in real world, devices are way more complex configured than 25 firewall rules.
Thanks
I am sitting in front of a CCR1072 (1000MHz clocked), running on ROS 6.49.13 which is used a company edge-router. With around 120 firewall-rules (in different chains), 50 NAT-rules, 130 Mangle-rules, 220 routes, 200 Simple-Queues and 1 Bridge with 40 VLANs. But I would say one third of everything is disabled (until needed).
This device is able to push routed (VLANx to VLANy) around 280-300Mbit/sec through a TCP-single-stream connection. Tested with different performance-tools, everytime same results. Because I have no reference, is this an acceptable value for such a configuration and device? This table: https://mikrotik.com/product/CCR1072-1G ... estresults is not very helpful, because it shows with 512byte and 25 IP-Firewall-Filter rules, its able to do 20691 Mbps. But in real world, devices are way more complex configured than 25 firewall rules.
Thanks
Statistics: Posted by Guscht — Thu Feb 22, 2024 10:58 am