Hello, trying to install wifi-qcom on a hAP ac2 after upgrade to 7.13.4 and failing. Is this supposed to be possible? Netinstall is not an option for me, the equipment is not near me.
Code:
# Here is the process I tried:# from a working AP running 7.13.4/system/package/uninstall wireless/system/reboot# try to make as clean as possible/system/reset-configuration keep-users=yes no-defaults=yes skip-backup=yes/interface bridgeadd name=bridge1 /interface bridge portadd bridge=bridge1 interface=ether1 add bridge=bridge1 interface=ether2 add bridge=bridge1 interface=ether3 add bridge=bridge1 interface=ether4add bridge=bridge1 interface=ether5 /ipv6 settingsset disable-ipv6=yes/ip addressadd address=192.168.54.2/24 interface=bridge1 network=192.168.54.0/ip dnsset servers=192.168.54.1/ip routeadd gateway=192.168.54.1/tool/fetch url="https://upgrade.mikrotik.com/routeros/7.13.4/wifi-qcom-7.13.4-arm.npk"/file/printColumns: NAME, TYPE, SIZE, CREATION-TIME# NAME TYPE SIZE CREATION-TIME 0 wifi-qcom-7.13.4-arm.npk package 7.5MiB 1970-01-01 18:04:401 flash disk 1970-01-01 18:03:062 flash/pub directory 1970-01-01 18:03:06/system/reboot# After reboot, log shows failed:/log print 02-15 18:31:43 system,error upgrade failed, free 4141 kB disk space for a (null)upgrade 02-15 18:31:43 system,info router rebooted 02-15 18:31:44 system,warning Missing wireless driver package, please install it to use built-in wireless properly/file printColumns: NAME, TYPE, CREATION-TIME# NAME TYPE CREATION-TIME 0 flash disk 1970-01-01 18:03:061 flash/pub directory 1970-01-01 18:03:06/system/resource/print uptime: 2m18s version: 7.13.4 (stable) build-time: Feb/07/2024 09:59:26 factory-software: 6.45.9 free-memory: 73.3MiB total-memory: 128.0MiB cpu: ARM cpu-count: 4 cpu-frequency: 672MHz cpu-load: 0% free-hdd-space: 3620.0KiB total-hdd-space: 15.2MiB write-sect-since-reboot: 51 write-sect-total: 1057330 architecture-name: arm board-name: hAP ac^2 platform: MikroTikStatistics: Posted by bp0 — Fri Feb 16, 2024 2:37 am