I did have a follow-up on this. So far, signal strength has been good since I made the changes you mentioned(thanks again!). There is another problem now where I can be right next to one of the APs and be on a video call, and it will drop out and then back in. There are no errors on those devices that I can tie them to, but my first guess is having the AP's so close together that the device switches from one to the other. I would run only the L009 if it could cover the whole house, but that's why I have the hAP AX lite cover the downstairs. I can't easily separate the two from being too close to each other. Any thoughts on why this might happen?No problem, if you still have any issues come back.
The second question is, what coverage distance and speed should I expect? Right now if I'm 20–30 feet away from one of the APs I can get around 30-60mbps, and I'm not upset about that, it seems adequate, but I don't know if that's what I should expect. Since neither AP has a 5ghz range, I'm guessing that's why I don't get higher.
Statistics: Posted by yodaman — Wed Feb 07, 2024 10:40 pm