Maybe connected but I suspect the version before 7.13.3 wasn't setting the regulatory Tx power levels correctly. I certainly spotted a reduction in Tx power in the UK with this version because I happened to be doing some lab work on Tx power when I upgraded. The version notes state that it assumes country = Latvia which possibly has lower Tx power limits than before.I bought an ax3 recently and wifi was great 800mbps next to the Router and ~400mbps two rooms away. I upgraded to 7.13.3 about a week ago and it went down to 300mbps and -70 Next to the Router and -85 and 10mbps at best two rooms away and lagging and loosing connection. Long story short after reading this thread i changed the country on the interfaces, if i set US tx power on 5ghz goes to 28 and on 2.4ghz goes to 27 if i set another country or none It goes down to 8 on the 5ghz and 16 on the 5ghz and even if modified does not set the new value. I tried downgrading to 7.13.2 and even lower with no luck.
Statistics: Posted by robmaltsystems — Sun Feb 04, 2024 5:01 pm