Hello,
In my homelab configuration, my RB5009 works with Cisco SG250 switch through a LACP Bonding.Previously, SG250 performs very well when i configure link aggregation with Openwrt and ASUS ax86u.
But now SG250 often disconnects with 5009 on one gi7 (connect to "ether3(Bond)").
Here is the log from SG250.For 5009, no link downs can be found in log.
BTW, the disconnection is regular (every 1 min), it can be related to LACP frames (1min interval). If i disable the LACP and set a manually aggregation, it works fine.
Any idea? Thanks.
In my homelab configuration, my RB5009 works with Cisco SG250 switch through a LACP Bonding.
Code:
/interface bondingadd mode=802.3ad name=Bond_SG250 slaves="ether2(Bond),ether3(Bond)"But now SG250 often disconnects with 5009 on one gi7 (connect to "ether3(Bond)").
Here is the log from SG250.
Code:
04-Feb-2024 03:35:38 %TRUNK-W-PORTREMOVED: Port gi7 removed from Po104-Feb-2024 03:35:38 %TRUNK-I-PORTADDED: Port gi7 added to Po104-Feb-2024 03:36:38 %TRUNK-W-PORTREMOVED: Port gi7 removed from Po104-Feb-2024 03:36:38 %TRUNK-I-PORTADDED: Port gi7 added to Po104-Feb-2024 03:37:38 %TRUNK-W-PORTREMOVED: Port gi7 removed from Po104-Feb-2024 03:37:38 %TRUNK-I-PORTADDED: Port gi7 added to Po104-Feb-2024 03:38:38 %TRUNK-W-PORTREMOVED: Port gi7 removed from Po104-Feb-2024 03:38:38 %TRUNK-I-PORTADDED: Port gi7 added to Po104-Feb-2024 03:39:38 %TRUNK-W-PORTREMOVED: Port gi7 removed from Po104-Feb-2024 03:39:38 %TRUNK-I-PORTADDED: Port gi7 added to Po104-Feb-2024 03:40:38 %TRUNK-W-PORTREMOVED: Port gi7 removed from Po104-Feb-2024 03:40:38 %TRUNK-I-PORTADDED: Port gi7 added to Po104-Feb-2024 03:41:38 %TRUNK-W-PORTREMOVED: Port gi7 removed from Po104-Feb-2024 03:41:38 %TRUNK-I-PORTADDED: Port gi7 added to Po1BTW, the disconnection is regular (every 1 min), it can be related to LACP frames (1min interval). If i disable the LACP and set a manually aggregation, it works fine.
Any idea? Thanks.
Statistics: Posted by xhyh — Sun Feb 04, 2024 6:00 am