I suppose this might be a pretty dumb question, but I noticed the following:
add address=192.168.88.1/24 interface=ether7 network=192.168.88.0
add address=192.168.77.1/24 interface=ether6 network=192.168.77.0
Completely empty configuration, no firewall rules, anything, just assigning two addresses to two interfaces.
When I connect to ether7(let's say from 192.168.88.5), I can access the router via 192.168.77.1. But when I add a simple Forward Log rule in the Firewall, I don't see any forwarded traffic - it appears as Input chain traffic instead. Since the two addresses are on different networks, shouldn't it be treated as routing/forwarding between the two?
add address=192.168.88.1/24 interface=ether7 network=192.168.88.0
add address=192.168.77.1/24 interface=ether6 network=192.168.77.0
Completely empty configuration, no firewall rules, anything, just assigning two addresses to two interfaces.
When I connect to ether7(let's say from 192.168.88.5), I can access the router via 192.168.77.1. But when I add a simple Forward Log rule in the Firewall, I don't see any forwarded traffic - it appears as Input chain traffic instead. Since the two addresses are on different networks, shouldn't it be treated as routing/forwarding between the two?
Statistics: Posted by allyx — Thu Feb 01, 2024 9:20 pm