Recently upgraded my core switch to RB5009UG+S+ from a Hex-S as it died. And instead of just uploading my backup config I thought perhaps I would give a manual config approach this time rather than rely on just defaults. I am having an issue with vlans not really communicating with each other. They can ping gateways but nothing inside and for some reason vlan 25 just isnt cooperating at all. Devices on the switch on vlan 25 can talk to each other but not outside and nothing outside can talk to them at all.
I have setup vlans, tied them to an interface, added addresses/dhcp/etc. I also have a Cisco switch I have hooked up to the last port (gi0/7) and onto a trunked port on the cisco (gi1/0/48). The two vlans I am setting up so I can begin some segmentation and create a much more fleshed out network plan I have been creating is just not playing nice. I have the config for both the mikrotik and cisco (with some redactions) and would love some help figuring out what I am missing as I have followed the basics and checked but something is either missing or misconfigured and things arent working.
With the attached files, the main issue is VLAN 25 has my old stuff I am going to migrate off to VLAN 50 but right now vlan 10 and 25 cant talk at all.
ITNETWRK-CORE01 is the mikrotik 5009
ITNETWRK-SW-01 is the cisco switch
Right now the wifi (running on a sep mikrotik) works fine.
The plan is to setup vlans and control access via the firewall for segmentation. The reason for all of this is I am trying to setup a lab environment now that I got the 5009.
Any help would be very much appreciated.
I have setup vlans, tied them to an interface, added addresses/dhcp/etc. I also have a Cisco switch I have hooked up to the last port (gi0/7) and onto a trunked port on the cisco (gi1/0/48). The two vlans I am setting up so I can begin some segmentation and create a much more fleshed out network plan I have been creating is just not playing nice. I have the config for both the mikrotik and cisco (with some redactions) and would love some help figuring out what I am missing as I have followed the basics and checked but something is either missing or misconfigured and things arent working.
With the attached files, the main issue is VLAN 25 has my old stuff I am going to migrate off to VLAN 50 but right now vlan 10 and 25 cant talk at all.
ITNETWRK-CORE01 is the mikrotik 5009
ITNETWRK-SW-01 is the cisco switch
Right now the wifi (running on a sep mikrotik) works fine.
The plan is to setup vlans and control access via the firewall for segmentation. The reason for all of this is I am trying to setup a lab environment now that I got the 5009.
Any help would be very much appreciated.
Statistics: Posted by lexitsrvcs22 — Wed Jan 31, 2024 8:50 pm