In one of untagged ports I have switch (just bridge over all ports, nothing else). Do I need to setup vlan also on this switch, or it will work, since port is untagged? It does not work in my case, but I want to know theory first, to be able to better find cause (wrong router configuration or switch configuration).
If you mean that on an untagged port of the router, you are putting a downstream switch. No, that switch does not need to be programmed for VLANs - or even be capable of VLAN operation.
I am also curious, why they are using 17 in last octet, any specific reason? add address=192.168.30.17/24 interface=vlan30 network=192.168.30.0
Not sure I understand why the question - it's a perfectly valid IP address. Although x.y.z.1 is certainly common for a router, it is not required. Personally my primary router is .251, the second router is .252 and the third is .253
Statistics: Posted by k6ccc — Sun Jan 28, 2024 1:41 am