Hi,
I'm trying to create a simple network between a host computer and an RPi 4 embedded system.
For this I choose Virtualbox with RouterOS CHR running the free license.
I attached 2 network cards to the VM, one bridge adapter for the hardware NIC connected to the RPi 4 and one Host-only virtual adapter for communication between host and CHR.
I have disabled the DHCP Server on the Host-only adapter.
In the CHR I have configured a bridge interface between the 2 available interfaces stated before. Added an address to this bridge interface and setup a DHCP Server.
The Host PC can ping the CHR bridge but cannot reach the RPi 4 which I can see and ping from the CHR.
I can see the lease for the RPi 4 bounded and ping the RPi 4 from the CHR.
Shouldn't the RPi 4 be reachable for the host and vice versa?
Current configuration:Thanks in advance for any input.
I'm trying to create a simple network between a host computer and an RPi 4 embedded system.
For this I choose Virtualbox with RouterOS CHR running the free license.
I attached 2 network cards to the VM, one bridge adapter for the hardware NIC connected to the RPi 4 and one Host-only virtual adapter for communication between host and CHR.
I have disabled the DHCP Server on the Host-only adapter.
In the CHR I have configured a bridge interface between the 2 available interfaces stated before. Added an address to this bridge interface and setup a DHCP Server.
The Host PC can ping the CHR bridge but cannot reach the RPi 4 which I can see and ping from the CHR.
I can see the lease for the RPi 4 bounded and ping the RPi 4 from the CHR.
Shouldn't the RPi 4 be reachable for the host and vice versa?
Current configuration:
Code:
# 2024-01-23 20:40:43 by RouterOS 7.13.2# software id = #/diskset slot1 slot=slot1 type=hardware/interface bridgeadd name=bridge1/ip pooladd name=dhcp_pool0 ranges=192.168.56.2-192.168.56.254/ip dhcp-serveradd address-pool=dhcp_pool0 interface=bridge1 name=dhcp1/interface bridge portadd bridge=bridge1 interface=ether2add bridge=bridge1 interface=ether1/ip addressadd address=192.168.56.0/24 interface=bridge1 network=192.168.56.0add address=192.168.56.2/24 interface=ether1 network=192.168.56.0add address=192.168.56.3/24 interface=ether2 network=192.168.56.0/ip dhcp-client# DHCP client can not run on slave or passthrough interface!add interface=ether1/ip dhcp-server networkadd address=192.168.56.0/24 gateway=192.168.56.1/system noteset show-at-login=nStatistics: Posted by pedroply — Tue Jan 23, 2024 10:42 pm